Skip to content

Katool KT-T835 Single Assist Arm Tire Changer with Bead Blaster

by Katool
Original price $1,899.00 - Original price $1,899.00
Original price
$1,899.00
$1,899.00 - $1,899.00
Current price $1,899.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-T835 is a wheel clamp tire changer with a single pneumatic assist arm, built for passenger vehicles and light trucks. It clamps 13"–26" from the outside and 14"–28" from the inside, and the assist arm helps with low-profile and stiff-sidewall tires. A pneumatic bead breaker and a bead blaster are part of the machine.

Shipping information

Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

Why Choose the Katool KT-T835

  • Single assist arm

    The pneumatic bead assist arm helps hold the bead down on low-profile and stiff-sidewall tires.

  • Larger clamping range

    The four wheel clamps cover 13"–26" outside and 14"–28" inside.

  • Bead blaster on board

    A tower surge tank and Turbo Blast hose assembly direct air under the rim lip to seat beads.

  • Pneumatic bead breaker

    The bead breaker produces 5510 lbs (2500 kg) of pressing force at 10 bar.

  • Foot pedal controls

    Separate pedals run the bead breaker, the jaw clamps and turntable rotation in both directions.

Product Overview

Assist Arm for Difficult Tires

The KT-T835 adds a pneumatic bead assist control arm with a bead roller, a bead assist tool, and a tire support arm with a helper disc that lifts the tire to bring the lower bead up. It handles both tube-type and tubeless tires.

Clamping, Swing Arm and Controls

Four wheel clamps, operated by the jaw clamp pedal, grip the rim from the outside (13"–26") or the inside (14"–28"). Max wheel diameter is approx. 40.9" and max wheel width is approx. 13.8". The swing arm carries the mount/demount head on a hex shaft with a locking lever. Three foot pedals control the bead breaker, the jaw clamps and turntable rotation (clockwise down, counter-clockwise up), and the turntable rotates at 6.8 r/min.

Bead Seating and Inflation

The bead blaster uses a Turbo Blast hose assembly and tower surge tank. A slide valve turns the blaster on and off, and the nozzle directs air under the rim lip to seat beads. Maximum charge (inflation) pressure is 3.5 bar (50 psi).

Specifications

SpecificationValue
ModelKT-T835
TypeWheel clamp tire changer, single pneumatic assist arm
Outside clamping range13"–26"
Inside clamping range14"–28"
Max wheel diameterApprox. 40.9"
Max wheel widthApprox. 13.8"
Power110V / 220V options, single phase
Bead breakerPneumatic
Bead breaking force5510 lbs (2500 kg) at 10 bar
Air pressure0.8–1.0 MPa (116–145 psi)
Max inflation pressure3.5 bar (50 psi)
Rotation speed6.8 r/min
Working noise<70 dB(A)
Motor0.75–1.1 kW
Net weight529 lbs
ConstructionSteel frame

What's Included

  • Machine base with turntable
  • Tower and tower surge tank
  • Swing arm with mount/demount shaft (hexagon shaft) and swing arm set knob
  • Mounting/dismounting head
  • Pneumatic bead assist control arm, auxiliary arm and auxiliary boom support
  • Bead assist tool, bead roller and tire support arm with helper disc
  • Bead breaker and bead breaker arm
  • Turbo Blast hose assembly
  • Bead lifting tool

Best For

  • Automotive repair shops and service bays handling passenger vehicles and light trucks
  • Tire centers that see a steady mix of low-profile and stiff-sidewall tires
  • Owners stepping up from a basic rim clamp changer who want an assist arm

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor
Install on flat, stable ground (not on a wooden pallet); the machine must sit solidly on its feet.
Clearance
Keep the back of the machine 0.6 m (600 mm minimum recommended clearance) from the wall, and leave room on both sides for the assist arm and for mounting and removing wheels.
Location
Choose a well-lit area away from oil, grease and brake lathe chips, and away from heat sources, water taps, humidifiers and damp or wet environments. Never connect the machine to an explosive gas source.
Assembly
The tower, assist arm, bead assist control arm, hoses, Turbo Blast hose, bead breaker arm and pad are assembled on site.
Maintenance
The oil-mist lubricator uses HG ISO VG32 oil (for example Esso Febis K32, Mobil Vacouline 1405 or Klüber 32). Re-tighten the clamp screws 20 days after first use.
Electrical
110V / 220V options, single phase; the machine plugs into a wall outlet (110V, 60 Hz)
Electrical
Confirm the voltage configuration with Garage Lift Depot before ordering.
Electrical
If an extension cord is used, its current rating must be equal to or more than that of the machine.
Air
Requires shop air at 0.8–1.0 MPa (116–145 PSI); the air line connects to the regulator and the tower accumulator.
Electrical
Motor: 0.75–1.1 kW.
Electrical
Amperage and air consumption are not specified. Have a licensed electrician check the data plate.

Warranty

Katool covers this machine with a 12-month warranty on all parts and product defects. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

It clamps 13"–26" from the outside and 14"–28" from the inside. Max wheel diameter is approx. 40.9" and max wheel width is approx. 13.8".

The pneumatic bead assist arm, with its bead roller and bead assist tool, helps work low-profile and stiff-sidewall tires. The tire support arm's helper disc lifts the tire to bring the lower bead up.

It comes in 110V / 220V options, single phase, and plugs into a wall outlet (110V, 60 Hz). Confirm the voltage configuration with Garage Lift Depot before ordering.

Keep the back of the machine at least 0.6 m (600 mm) from the wall and leave room on both sides for the assist arm and for handling wheels.

Yes. The tower, assist arm, bead assist control arm, hoses, Turbo Blast hose, bead breaker arm and pad are assembled on site.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare