Rolling Bridge Jacks
A rolling bridge jack rides on the runways of a 4-post or alignment lift and raises the vehicle off the runways, so you can take the wheels off for brake, tire and suspension work. We carry bridge jacks from Daytona, Olympic and Katool, rated from 3,500 lb to 12,000 lb.
Fit depends on your lift's runway design, so tell us your lift brand and model and we'll match the right jack.
Filters
Triumph RJ-15 15,000 lb Rolling Bridge Jack
TriumphThe Triumph RJ-15 (also known as the RJ-15000) is a 15,000 lb rolling bridge jack for four-post lifts. It rides on the runways and lifts the vehicl...
View full detailsTriumph RJ-5 5,000 lb Rolling Bridge Jack
TriumphThe Triumph RJ-5 (also known as the RJ-5000) is a 5,000 lb rolling bridge jack for four-post lifts. It rides on the runways and lifts the vehicle's...
View full detailsTriumph RJ-9 9,000 lb Rolling Bridge Jack
TriumphThe Triumph RJ-9 (also known as the RJ-9000) is a 9,000 lb rolling bridge jack for four-post lifts. It rides on the runways and lifts the vehicle's...
View full detailsTriumph SJ-35 3,500 lb Sliding Bridge Jack for NSS-8 Lifts
TriumphThe Triumph SJ-35 is a 3,500 lb manual sliding bridge jack made for the Triumph NSS-8 and NSS-8XLT storage lifts only. It slides along the runways ...
View full detailsOlympic 4PHDA-RJ 7,000 lb Air-Hydraulic Alignment Bridge Jack
Olympic EquipmentThe Olympic 4PHDA-RJ is a 7,000 lb bridge jack with an air-operated hydraulic ram, made for Olympic's 4PHDXLA-11 and 4PHDXLA-15 open-front alignmen...
View full detailsOlympic 4PRJ-9 9,000 lb Hand-Pump Bridge Jack for Heavy-Duty Four-Post Lifts
Olympic EquipmentThe Olympic 4PRJ-9 is a 9,000 lb bridge jack with a hydraulic hand pump, made for Olympic's 4PHDXL-22, 4PHDXL-27 and 4PHDXL-33 heavy-duty J-track 4...
View full detailsOlympic HLCJ-14 7,000 lb Center Bridge Jack for the 4PHDXLA-14
Olympic EquipmentThe Olympic HLCJ-14 is a 7,000 lb center bridge jack made exclusively for the Olympic 4PHDXLA-14 alignment lift. It lifts the vehicle off the runwa...
View full detailsOlympic YZRCJ-7 7,000 lb Rolling Bridge Jack for J-Track Four-Post Lifts
Olympic EquipmentThe Olympic YZRCJ-7 is a 7,000 lb rolling bridge jack for 4-post lifts with a J-shaped inner runway track. The carriage expands from 34.5" to 46", ...
View full detailsOlympic FBCJ-6 6,000 lb Center Bridge Jack for L-Track 4-Post Lifts
Olympic EquipmentThe Olympic FBCJ-6 is a 6,000 lb center bridge jack for 4-post lifts with a flat L-shaped inner runway track, such as the Olympic 4PXW-10. It is ra...
View full detailsOlympic HLCJ-6 6,000 lb Center Bridge Jack for J-Track 4-Post Lifts
Olympic EquipmentThe Olympic HLCJ-6 is a 6,000 lb center bridge jack for 4-post lifts with a J-shaped inner runway track and 34"–35" runway spacing, such as the Oly...
View full detailsOlympic YZRCJ-35 3,500 lb Pneumatic Rolling Bridge Jack
Olympic EquipmentThe Olympic YZRCJ-35 is an air-operated (pneumatic) rolling bridge jack rated at 3,500 lb. Track type and runway spacing are not specified, so cont...
View full detailsKatool KT-RJ60 6,000 lb Rolling Jack for the KT-4H150
KatoolThe Katool KT-RJ60 is a 6,000 lb low-profile rolling jack designed for the Katool KT-4H150 four-post lift. It rolls into position beneath the vehic...
View full detailsKatool KT-RJ70 7,000 lb Air-Hydraulic Rolling Bridge Jack
KatoolThe Katool KT-RJ70 is a 7,000 lb air-hydraulic rolling bridge jack that rides on the runways of the Katool KT-4H850 and KT-4H110 four-post lifts to...
View full detailsKatool KT-RJ50 5,000 lb Rolling Jack
KatoolThe Katool KT-RJ50 is a 5,000 lb rolling jack for the Katool KT-4H110, KT-4H950 and KT-4H850 four-post lifts. Lifting height range, rail width rang...
View full detailsDaytona RAJ5 5,000 lb Rolling Jack for Daytona Parking Lifts
Daytona LiftsThe Daytona RAJ5 is a 5,000 lb air-powered rolling jack built for Daytona's 9,000 and 10,000 lb parking lifts. It rides on the lift and raises the ...
View full detailsDaytona RAJ6 6,000 lb Rolling Jack for Daytona Parking Lifts
Daytona LiftsThe Daytona RAJ6 is a 6,000 lb air-powered rolling jack built for Daytona's 9,000 and 10,000 lb parking lifts. It spans 36" to 64", lowers to 9.25"...
View full detailsDaytona RAJ12 12,000 lb Rolling Jack for LFPA24
Daytona LiftsThe Daytona RAJ12 is a 12,000 lb air-powered rolling jack made for Daytona's LFPA24 24,000 lb alignment lift. It lowers to 8.3", locks at 20", and ...
View full detailsDaytona RAJ8 8,000 lb Rolling Jack for LFPA12 & LFPA14
Daytona LiftsThe Daytona RAJ8 is an 8,000 lb air-powered rolling jack made for Daytona's LFPA12 and LFPA14 alignment lifts. It spans 32-1/2" to 69-1/4", lowers ...
View full detailsHow To Choose: Rolling Bridge Jacks
What does a bridge jack do?
A four-post lift holds the vehicle on its tires. A bridge jack spans the runways and lifts the vehicle at its lifting points, freeing the wheels for service without moving the vehicle off the lift.
Lift compatibility comes first
Bridge jacks ride on rails or tracks inside the runways, and designs differ by brand and model. Several jacks in our range are matched to specific lifts, for example the Daytona RAJ8 to Daytona 12K and 14K alignment lifts, and the Olympic HLCJ-14 to the Olympic 4PHDXLA-14. Always confirm the jack fits your lift model before ordering.
Runway track type
Some Olympic jacks are built for a "J"-shaped inner runway track and others for an "L"-shaped track. Check your lift's runway profile and the jack's stated fit.
Capacity
Choose a jack rated for the axle weight you'll lift, not the full vehicle weight. Our range runs from 3,500 lb to 12,000 lb.
Span and lifting height
Check the jack's minimum and maximum span against your runway spacing, and its lifting height against your service needs. For example, Daytona lists a 36–64 in span for the RAJ6 and 38–73 in for the RAJ8.
Air or hydraulic operation
Many bridge jacks use shop air to power a hydraulic or scissor mechanism; others use a hand pump. Air-operated models need a compressor that meets the stated pressure.
One jack or two
One jack raises one axle. Many shops use two so they can lift both axles at once.
Frequently Asked Questions
Fit depends on your lift's runway design. Send us your lift brand and model and we'll confirm.
Choose a rating above the axle weight you'll lift.
Many do. Check the operation and pressure requirement on each product page.
Yes, if it's compatible. Several of our jacks are made for specific alignment lifts.
Yes. Send us your lift brand and model, and we'll match a compatible jack.