Skip to content

Transmission Jacks

A transmission jack supports and positions a transmission or similar drivetrain component while it's removed or installed. Our current range is high-lift transmission jacks from Olympic, built for use under a vehicle raised on a lift.

Tell us your lift, the vehicles you work on and the components you need to support, and we'll help you choose the right jack.

Filters

Original price $499.00 - Original price $499.00
Original price
$499.00
$499.00 - $499.00
Current price $499.00

Olympic TJ-1102 1,100 lb Two-Stage Transmission Jack

Olympic Equipment
in stock

The Olympic TJ-1102 is a 1,100 lb two-stage hydraulic transmission jack that works from 33.5 in to 68.9 in. It has a universal mounting head with a...

View full details
Original price $499.00 - Original price $499.00
Original price
$499.00
$499.00 - $499.00
Current price $499.00
Original price $349.00 - Original price $349.00
Original price
$349.00
$349.00 - $349.00
Current price $349.00

Olympic TJ-1101A 1,100 lb Single-Stage Transmission Jack

Olympic Equipment
in stock

The Olympic TJ-1101A is a 1,100 lb single-stage hydraulic transmission jack for removing and installing transmissions with the vehicle up on a lift...

View full details
Original price $349.00 - Original price $349.00
Original price
$349.00
$349.00 - $349.00
Current price $349.00
Buying guide

How To Choose: Transmission Jacks

What does a transmission jack do?

A transmission jack holds a heavy component on an adjustable saddle so you can lower it out of the vehicle or raise it into position with control. It's designed for balance and fine positioning rather than lifting the vehicle itself.

High-lift vs. floor transmission jacks

A high-lift transmission jack stands tall and reaches up to a vehicle raised on a lift. A floor or low-profile transmission jack works lower to the ground, typically under a vehicle on jack stands. If you work on a 2-post or 4-post lift, a high-lift jack is the usual choice.

Single-stage vs. 2-stage

A 2-stage jack uses two telescoping sections, so it collapses lower and still reaches a useful working height. The Olympic TJ-1102 is a 2-stage model with a lower minimum height than the single-stage TJ-1101A. Compare minimum and maximum heights against your lift's working height.

Capacity

Choose a rated capacity above the weight of the heaviest component you'll handle. Both current Olympic models are rated at 1,100 lb.

Lifting range

Check the jack's minimum and maximum height against the height of your raised vehicle. The TJ-1101A lists 53 to 81 in and the TJ-1102 lists 33.5 to 68.9 in.

Saddle and tilt adjustment

An adjustable saddle and tilt control help you match the angle of the component during removal and installation. Check each product page for saddle size, adjustment and tilt range.

Hydraulic operation

Both current models are hydraulic with a gradual release for controlled lowering.

Stability

A wide base and swivel casters help keep the load stable while you move it. Keep the load centered and move slowly.

Safety

Secure the component to the saddle as the manufacturer instructs, never exceed rated capacity, and never work under a load supported only by the jack.

FAQ

Frequently Asked Questions

A transmission jack designed to reach up to a vehicle raised on a lift, rather than working near the floor.

A 2-stage design collapses lower while still reaching working height, which helps if your lift height varies. Compare the height ranges for your setup.

Choose a rating above the weight of the component you'll remove, plus a safety margin.

Follow the manufacturer's guidance for the specific jack and its saddle.

Yes. Send us your lift model, vehicles and the components you work on, and we'll help you narrow the options.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare