Skip to content

Katool KT-M150D 15,000 lb Clear-Floor 2-Post Lift

by Katool
Original price $4,299.00 - Original price $4,299.00
Original price
$4,299.00
$4,299.00 - $4,299.00
Current price $4,299.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-M150D is a 15,000 lb clear-floor two-post lift with symmetric swing arms, an overhead shutoff bar and a single-point lock release. It lifts to 72.83", gives 116.14" of drive-through width and stands 176.77" tall overall. It runs on 220V, 60 Hz, single phase and needs a slab at least 6.5" thick.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
15,000 lb
Power
220V, 60 Hz, single phase
Overall height
176.77" (4490 mm)
Overall width
160.59" (4079 mm)
Maximum lifting height
72.83" (1850 mm)

Why Choose the Katool KT-M150D

  • Rated for 15,000 lb

    The KT-M150D has a rated capacity of 15,000 lb.

  • Wide drive-through

    The posts leave 116.14" (2950 mm) of drive-through width.

  • Single-point lock release

    One latch on one side releases the safety locks on both carriages.

  • Clear floor with overhead shutoff

    A cross beam with a top limit switch keeps the floor between the columns open.

  • Long symmetric arms

    All four swing arms adjust from 835 mm to 1650 mm.

  • Lifting height

    The lift pads rise to a maximum lifting height of 72.83" (1850 mm).

Product Overview

Clear-Floor Two-Post Design

The KT-M150D connects its posts with an overhead cross beam fitted with a top limit switch and shutoff bar, leaving the floor between the columns clear. The lift stands 176.77" (4490 mm) tall and 160.59" (4079 mm) wide overall.

Capacity, Height and Arm Reach

The rated capacity is 15,000 lb. The lift pads travel from a minimum height of 110 mm to a maximum lifting height of 72.83" (1850 mm), with a full rise in 50 seconds or less. The four symmetric swing arms each adjust from 835 mm to 1650 mm. Width between the columns is 3350 mm, and drive-through width is 116.14" (2950 mm).

Locks and Lowering

Mechanical safety locking plates on both carriages engage a toothed bar. A single latch on one side controls the locks on both sides, so the lift can be released from one position. Lowering takes 20–40 seconds.

Power and Installation

The lift runs on 220V, 60 Hz, single phase. Each column is anchored with five concrete anchor bolts, and the slab must be at least 6.5" thick and rated at 3,000 PSI.

Specifications

SpecificationValue
ModelKT-M150D
Lift typeTwo-post, clear floor with cross beam, symmetric
Rated capacity15,000 lb
Maximum lifting height72.83" (1850 mm)
Minimum height110 mm
Overall height176.77" (4490 mm)
Overall width160.59" (4079 mm)
Width between columns3350 mm
Drive-through width116.14" (2950 mm)
Front arm reach835–1650 mm
Rear arm reach835–1650 mm
Arm designSymmetric, 4 swing arms
Lock releaseSingle-point
Lifting time50 s or less
Lowering time20–40 s
Power220V, 60 Hz, single phase
Concrete requirementAt least 6.5" thick, 3,000 PSI
Net weight820 kg

What's Included

  • Overhead assembly
  • Offside and powerside posts
  • 4 lift arm assemblies
  • Frame contact pads
  • 2 hydraulic cylinders
  • Hydraulic power unit (220V)
  • Parts box

Optional: KT-MP2 Lift Height Extensions (set of 4); KT-MP5 Two Post Lift Frame Cradle Set; emergency hand pump.

Best For

  • Shops and garages lifting vehicles up to 15,000 lb
  • Bays that need 116.14" of drive-through width between the posts
  • Buildings with the ceiling height for a 176.77" overall lift height

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Concrete
At least 6.5" thick, 3,000 PSI, cured 28 days.
Anchors
Five concrete anchor bolts per column, drilled with a 19 mm bit; shim no more than 5 mm.
Ceiling
A minimum ceiling height is not specified. The lift stands 176.77" (4490 mm) tall overall, so confirm your ceiling clearance with Garage Lift Depot before ordering.
Bay
Allow about 4 m in front of and behind the lift, measured from the centerline.
Electrical
220V, 60 Hz, single phase.
Electrical
Amperage is not specified; have a licensed electrician confirm the circuit from the data plate.
Hydraulic
Hydraulic oil: N32 or N46, 10 L capacity.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

A slab at least 6.5" thick, rated at 3,000 PSI and cured 28 days. Each column takes five concrete anchor bolts.

The lift stands 176.77" (4490 mm) tall overall. A minimum ceiling height is not specified, so confirm your clearance with Garage Lift Depot before ordering.

The maximum lifting height is 72.83" (1850 mm), and the lift pads start at 110 mm.

220V, 60 Hz, single phase. Amperage is not specified, so have a licensed electrician confirm the circuit from the data plate.

A single latch on one side releases the locks on both carriages.

Drive-through width is 116.14" (2950 mm), and the width between the columns is 3350 mm.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare