Skip to content

Olympic 4PXLA-10 Dually 10,000 lb 4-Post Alignment Lift with Scissor Jacks

Original price $11,798.00 - Original price $11,798.00
Original price
$11,798.00
$11,798.00 - $11,798.00
Current price $11,798.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Olympic 4PXLA-10 "The Dually" is a 10,000 lb 4-post alignment lift with a built-in scissor jack, front turntables and rear slip plates. Its 112 in drive-through width and adjustable runway spacing are sized for dual-wheel and long-bed trucks as well as cars.

Shipping information

A forklift is required on site.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
10,000 lb (lift)
Built-in scissor jack capacity
6,600 lb

Why Choose the Olympic 4PXLA-10

  • Lift and jack capacity

    The lift has a 10,000 lb rated lift capacity, with a built-in scissor jack rated at 6,600 lb for raising the vehicle off the runways.

  • Turntables and slip plates

    Front turntables and rear slip plates are included, ready for wheel alignment work.

  • Wide drive-through

    The 112 in drive-through width and 125 in between posts suit dually and super-wide vehicles.

  • Adjustable runway spacing

    The secondary runway moves and pins in place.

  • Locks and clearance

    The lift has 19 locking positions and 84.89 in of maximum clearance under the runways.

  • Power unit

    It runs on 110V with the included 2.2 kW (3 HP) power unit; a 220V unit is optional.

Product Overview

An Alignment Lift Sized for Dually Trucks

The 4PXLA-10 is Olympic's 10,000 lb alignment lift for dual-wheel trucks, long-bed trucks, service vehicles and super-wide vehicles, as well as everyday cars. The 112 in drive-through width and 125 in between posts give wide vehicles room to pass between the posts, and the movable secondary runway sets the track width to suit the vehicle.

Built-In Scissor Jack

The built-in scissor jack raises the vehicle so the wheels hang free for suspension, brake and tire work during an alignment. The jack is rated at 6,600 lb. That rating applies to the jack only — the lift itself remains rated at 10,000 lb.

Alignment Equipment on Board

Front turntables and rear slip plates come with the lift, so the wheels can turn and settle freely while you adjust camber, caster and toe. Removable approach ramps and wheel stops are included, along with a tool tray.

Lifting, Locking and Air

The lift rises in about 50 seconds and lowers in about 50 seconds, with 19 locking positions up to 84.89 in of clearance under the runways. Locks release by air, and the jack has a pneumatic safety, so the lift needs a regulated shop air supply. The lift is load-tested at 150% of its rated capacity.

Specifications

SpecificationValue
Model4PXLA-10 The Dually
Lift type4-post alignment lift
Rated capacity10,000 lb (lift)
Built-in scissor jack capacity6,600 lb
Drive-through width112 in
Width between posts125 in
Runway spacingAdjustable (secondary runway movable, pinned)
Max clearance under runways84.89 in
Locking positions19
Rise / lowering timeApprox. 50 s / approx. 50 s
Lock releaseAir-operated
Alignment equipmentFront turntables, rear slip plates
Power unit (included)110V, 2.2 kW, 3 HP
Optional power unit220V
Air supply90–120 psi, clean, dry, lubricated and regulated

What's Included

  • 4PXLA-10 lift with built-in scissor jack
  • Front turntables and rear slip plates
  • Caster kit (caster arms)
  • Removable approach ramps
  • Removable wheel stops
  • Tool tray
  • Air filter regulator (oil-water separator)
  • 110V power unit

Not included: Air compressor, installation, electrical work. Optional: 220V power unit, oil pans.

Best For

  • Alignment and tire shops servicing dually and long-bed trucks
  • Fleet and service-vehicle shops that need alignment and jacking on one lift
  • Shops with only 110V available at the bay

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
Allow for the 84.89 in maximum clearance under the runways plus the runways and the tallest vehicle, and measure to the lowest obstruction.
Floor
Level, with a slope of no more than 3 degrees.
Concrete
At least 9.8 in thick, steel-reinforced, 3,500 psi; new concrete must cure at least 28 days. Anchor holes use a 3/4 in masonry bit.
Air
Clean, dry, lubricated air regulated to 90–120 psi through a filter-regulator-lubricator within 30 ft of the lift, using 6 mm air hose.
Location
Indoor installation only; do not install the lift outdoors.
Electrical
Included power unit: 110V, 2.2 kW, 3 HP. A 220V power unit is available as an option.
Electrical
Check the motor plate before wiring, and have a qualified electrician do the wiring.
Air
Air-operated lock release and pneumatic jack safety; requires shop air.

Warranty

Olympic warranty: 10 years on major structural components; 3 years on electric and pneumatic power units, hydraulic cylinders, cables, hoses, locks, pulleys, sheaves and bushings; 1 year on wear parts such as pads, slide blocks and rubber components. Coverage begins on the date of shipment, applies to the original purchaser, requires professional installation, and does not include labor.

Frequently Asked Questions

The built-in scissor jack is rated at 6,600 lb. The lift is rated at 10,000 lb; the jack rating does not change the lift's capacity.

It is designed for dual-wheel and long-bed trucks, with a 112 in drive-through width and 125 in between posts. Keep the vehicle within 10,000 lb.

Yes. Locks release by air, and the manual calls for 90–120 psi regulated air through a filter-regulator-lubricator within 30 ft of the lift.

Yes. The included power unit is 110V, 2.2 kW, 3 HP. A 220V unit is optional.

No. The lift is approved for indoor installation only.

At least 9.8 in of steel-reinforced 3,500 psi concrete, cured a minimum of 28 days if new.

Related Equipment

Olympic 4PXLA-10 Manual

Olympic 4PXLA-10 manual

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare