Skip to content

Olympic Essential Alignment Package: 4PXLA-10 10,000 lb Lift + AS800 3D Aligner

Original price $21,969.00 - Original price $21,969.00
Original price
$21,969.00
$21,969.00 - $21,969.00
Current price $21,969.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Olympic Essential Alignment Package pairs the 4PXLA-10 "The Dually" 10,000 lb 4-post alignment lift with the AS800 True 3D touchless wheel alignment machine. It puts the lift, turntables, slip plates and a 3D aligner in one order, with both units on 110V power.

Shipping information

A forklift is required on site.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
10,000 lb (4PXLA-10 lift)
Built-in scissor jack capacity
6,600 lb

Why Choose the Olympic Essential Alignment Package

  • Matched lift and aligner

    The package pairs the 4PXLA-10 alignment lift with the AS800 True 3D touchless aligner.

  • Lift capacity

    The lift has a 10,000 lb capacity, with a built-in scissor jack rated at 6,600 lb.

  • Turntables and slip plates

    Front turntables and rear slip plates are included with the lift.

  • Touchless wheel clamps

    The AS800 has touchless wheel clamps and a rolling cart with screen.

  • Power for both units

    The lift's included power unit and the AS800 both run on 110V power.

Product Overview

The Lift: 4PXLA-10 the Dually

The lift is rated at 10,000 lb and has a built-in scissor jack rated at 6,600 lb; the jack rating does not change the lift's 10,000 lb capacity. It has 125 in between posts, 84.89 in of maximum clearance under the runways, and a 229 in platform length. Front turntables, rear slip plates, approach ramps, wheel stops and a caster kit are included. The lift is load-tested at 150% of its rated capacity.

The Aligner: AS800 True 3D

The AS800 is a touchless 3D alignment system on a rolling cart with a screen, using touchless wheel clamps. It measures camber, toe, caster and SAI over a ±45° range with ±0.01° accuracy, and handles tire diameters of 18–43.5 in.

Planning the Bay

The AS800 manual calls for a workspace at least 7 m long, 4 m wide and 3 m high (about 23 ft × 13.1 ft × 9.8 ft). The lift must be installed indoors on reinforced concrete and needs regulated shop air. Plan the lift position and the aligner's column distance together before the slab and electrical work are done.

Specifications

SpecificationValue
Package contentsOlympic 4PXLA-10 alignment lift + Olympic AS800 True 3D touchless aligner
Rated capacity10,000 lb (4PXLA-10 lift)
Built-in scissor jack capacity6,600 lb
Width between posts125 in
Max clearance under runways84.89 in
Platform length229 in
Lift alignment equipmentFront turntables, rear slip plates
Lift power unit (included)110V, 2.2 kW, 3 HP (220V optional)
Lift air supply90–120 psi, clean, dry, lubricated and regulated
AS800 power110V, 60 Hz, single-phase; dedicated grounded circuit
AS800 measuring rangeCamber, toe, caster, SAI ±45°
AS800 accuracy±0.01°
AS800 workable tire diameter18–43.5 in
AS800 workspaceAt least 7 m L × 4 m W × 3 m H (about 23 × 13.1 × 9.8 ft)

What's Included

  • Olympic 4PXLA-10 Dually alignment lift with built-in scissor jack, front turntables, rear slip plates, approach ramps, wheel stops, caster kit and 110V power unit
  • Olympic AS800 True 3D touchless aligner with rolling cart and screen and touchless wheel clamps

Not included: Installation, electrical work, air compressor, the ACB-1 calibration tool, and add-ons such as anchoring epoxy, which are priced separately.

Best For

  • Shops adding wheel alignment as a new service line
  • Tire and service shops replacing an older lift and aligner together
  • Shops aligning cars, SUVs, vans and light trucks, with lift capacity for dual-wheel trucks

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor and workspace
At least 7 m × 4 m × 3 m (about 23 × 13.1 × 9.8 ft) for the AS800 workspace, per its manual; plan the lift within that space.
Concrete
For the lift, at least 9.8 in of steel-reinforced 3,500 psi concrete; new concrete must cure at least 28 days. Slope no more than 3 degrees.
Air
Clean, dry, lubricated air regulated to 90–120 psi through a filter-regulator-lubricator within 30 ft of the lift.
Location
Indoor installation only for the lift.
Electrical
Lift: included 110V, 2.2 kW, 3 HP power unit; 220V optional.
Electrical
AS800: 110V, 60 Hz, single-phase on a dedicated grounded circuit, not shared with the lift, tire changer or compressor.
Electrical
A licensed electrician should confirm both circuits.

Warranty

Lift: Olympic warranty of 10 years on major structural components; 3 years on electric and pneumatic power units, hydraulic cylinders, cables, hoses, locks, pulleys, sheaves and bushings; 1 year on wear parts such as pads, slide blocks and rubber components. Coverage begins on the date of shipment, applies to the original purchaser, requires professional installation, and does not include labor. AS800: this product is covered by Olympic's warranty. Contact Garage Lift Depot to confirm the current warranty term for the AS800 before ordering.

Shipment

Crate
The AS800 ships in 3 crates, approx. 640 lb total. Crate dimensions and weight for the lift could not be confirmed.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

The Olympic 4PXLA-10 Dually 10,000 lb alignment lift and the Olympic AS800 True 3D touchless wheel alignment machine.

The lift's built-in scissor jack is rated at 6,600 lb. The lift itself is rated at 10,000 lb.

Yes. The lift's included power unit is 110V, and the AS800 runs on 110V, 60 Hz, single-phase. Give the AS800 its own dedicated circuit.

The AS800 manual calls for at least 7 m × 4 m × 3 m (about 23 × 13.1 × 9.8 ft) of workspace.

No. The ACB-1 calibration tool is sold separately.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare