Skip to content

Katool KT-M120 12,000 lb Clear-Floor 2-Post Lift

by Katool
Original price $2,599.00 - Original price $2,599.00
Original price
$2,599.00
$2,599.00 - $2,599.00
Current price $2,599.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-M120 is a 12,000 lb clear-floor two-post lift with an overhead cross beam and symmetric 2-stage arms. It lifts to 70.75" (1800 mm), gives 117.75" (2990 mm) of drive-through width, stands about 166.75" tall overall, and runs on a 220V, 60 Hz, single-phase power unit as standard.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
12,000 lbs (5500 kg)
Power
220V, 60 Hz, single phase (standard); 110V, 60 Hz, single phase optional
Overall height
~166.75" (4235 mm)
Overall width
~165.5" (4204 mm)
Maximum lifting height
70.75" (1800 mm)

Why Choose the Katool KT-M120

  • Rated for 12,000 lbs

    The lift is rated at 12,000 lbs (5500 kg) for full-size trucks, vans and SUVs within its rating.

  • Clear floor between posts

    The overhead cross beam leaves the floor open for jacks, drain pans and rolling carts.

  • Wide drive-through

    At 117.75" (2990 mm), the drive-through width gives wider vehicles room to pull in.

  • Symmetric 2-stage arms

    The four arms are symmetric with 2 stages, and +30 mm and +120 mm extension adapters are included.

  • Overhead safety shutoff

    The cross beam carries an overhead safety shutoff bar.

  • Standard shop power

    The 2.2 kW power unit runs on 220V, 60 Hz, single phase, with a 110V upgrade available.

Product Overview

Clear-Floor Design with Overhead Cross Beam

The KT-M120 is a clear-floor two-post lift with a cross beam across the top of the posts. Lifting comes from dual hydraulic chain-drive cylinders with dual equalizer cables, and the cross beam carries an overhead safety shutoff bar. Feet-protection guardrails and a tool tray are part of the package.

Capacity and Fit

Rated capacity is 12,000 lbs (5500 kg). Pads start at a 4.25" (110 mm) minimum height and rise to a 70.75" (1800 mm) maximum lifting height. Drive-through width is 117.75" (2990 mm), inside column width is about 130" (3390 mm), and the outside of the columns measures 151.25" (3840 mm). Overall width is about 165.5" (4204 mm). The symmetric 2-stage arms come with +30 mm and +120 mm extension adapters for higher lifting points.

Locks and Controls

Mechanical safety locking plates engage a toothed bar in each column. The manual safety release works from two sides. Lifting takes up to 50 seconds, and lowering takes 20 seconds or more.

Power and Site

The 2.2 kW hydraulic power unit runs on 220V, 60 Hz, single phase as standard; a 110V, 60 Hz, single-phase power unit is an optional add-on. Plan for the overall height of about 166.75" (4235 mm) before ordering. The slab must be at least 5.9" (150 mm) thick and rated at 3,000 PSI or more. Net weight is 1,786 lbs (810 kg).

Specifications

SpecificationValue
ModelKT-M120
Lift typeTwo-post clear-floor lift with cross beam
Rated capacity12,000 lbs (5500 kg)
Maximum lifting height70.75" (1800 mm)
Minimum height4.25" (110 mm)
Overall height~166.75" (4235 mm)
Overall width~165.5" (4204 mm)
Outside of columns151.25" (3840 mm)
Width between columns~130" (3390 mm) inside column width
Drive-through width117.75" (2990 mm)
Arm designSymmetric arms, 2 stages
DriveDual hydraulic chain-drive cylinders, dual equalizer cables
Lock releaseManual safety release from two sides
Lifting timeUp to 50 seconds
Lowering time20 seconds or more
Power220V, 60 Hz, single phase (standard); 110V, 60 Hz, single phase optional
Motor2.2 kW
Concrete requirementAt least 5.9" (150 mm) thick, 3,000 PSI or more
Net weight1,786 lbs (810 kg)

What's Included

  • Overhead cross beam with overhead safety shutoff bar
  • 4 lift arm assemblies (2-stage) with frame contact pads
  • 2 posts with 2 post extensions
  • 2 hydraulic cylinders
  • Hydraulic power unit (220V, 60 Hz, single phase)
  • Support adapters with +30 mm and +120 mm extension adapters
  • Door-protecting rubber pads
  • Tool tray and guardrails
  • Anchor bolts

Optional: 110V, 60 Hz, single-phase power unit; emergency hand pump; KT-MP2 lift height extensions (set of 4); KT-MP5 two-post lift frame cradle set.

Best For

  • Shops and garages servicing full-size pickups, vans and SUVs up to 12,000 lbs
  • Bays that need open floor space under the vehicle for jacks and drain equipment
  • Buildings with the ceiling height for a lift about 166.75" tall

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Concrete
At least 5.9" (150 mm) thick, 3,000 PSI or more, reinforced with steel bar, level and aged at least 7 days. No asphalt, seams or cracks under the posts.
Anchoring
5 concrete anchor bolts per post, drilled with a sharp 19 mm bit to the anchor length; tighten with a torque wrench only (no impact tools) and shim no more than 5 mm.
Ceiling
No fixed figure. The ceiling must clear the lift's overall height of about 166.75" (4235 mm), and it must also clear the 70.75" maximum lifting height plus your tallest vehicle plus at least 6" (152 mm). Keep the area free of overhead obstructions.
Bay
Leave room in front of and behind the lift for vehicles; maximum cantilever is about 4 m from the centerline in each direction.
Electrical
220V, 60 Hz, single phase (standard); 110V, 60 Hz, single-phase power unit optional.
Electrical
Motor: 2.2 kW. The lift needs a dedicated power line installed by a licensed electrician.
Electrical
Amperage is not specified; have a licensed electrician confirm the circuit from the data plate.
Hydraulic
Hydraulic oil: N32 or N46, 10 L oil capacity; change it 6 months after initial use, then yearly.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

The lift stands about 166.75" (4235 mm) tall, so the ceiling must clear that. It must also clear the 70.75" maximum lifting height plus your tallest vehicle plus at least 6" of clearance.

117.75" (2990 mm), with an inside column width of about 130" (3390 mm).

Symmetric, with 2-stage arms. If you prefer an asymmetric layout at the same rating, see the KT-AM120SD.

A dedicated 220V, 60 Hz, single-phase line for the standard 2.2 kW power unit, installed by a licensed electrician. A 110V, 60 Hz, single-phase power unit is optional. Amperage is not specified, so confirm the circuit from the data plate.

At least 5.9" (150 mm) of reinforced, level concrete rated at 3,000 PSI or more, aged at least 7 days, with no asphalt, seams or cracks.

Support adapters with +30 mm and +120 mm extension adapters, plus door-protecting rubber pads. KT-MP2 height extensions and a KT-MP5 frame cradle set are optional.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare