Daytona LTPA10 10,000lb 2 Post Lift - Adjustable Width
Specifications
Daytona LTPA10 10,000 lb Adjustable-Width 2-Post Overhead Lift
Build a more capable service bay without committing to an oversized lift footprint. The Daytona LTPA10 combines professional 10,000 lb lifting capacity with three installation-width settings, giving shops the flexibility to balance vehicle clearance against available floor space.
Built For: General repair shops, dealerships, fleet facilities, restoration garages, and serious private workshops servicing passenger vehicles, SUVs, vans, and compatible light-duty trucks.
Buyer’s Note: Confirm the Fit Before Ordering
The LTPA10 is an overhead lift, so the floor between the columns remains clear—but the bay must accommodate its 141.6-inch overall height. Its three width configurations are selected during installation.
This model is not listed as ALI Certified. Facilities requiring an ALI-certified lift should select Daytona’s designated ALI-certified model instead.
Always confirm vehicle weight, manufacturer-approved lifting points, ceiling height, concrete specifications, and electrical service before installation.
Why It Holds Up
- Three width configurations fit more shop layouts: Install the lift at an overall floor width of 126.8, 132.7, or 138.6 inches. This lets you conserve space in a tighter bay or create more drive-through room for wider vehicles.
- 10,000 lb capacity handles everyday professional service work: The LTPA10 provides the lifting strength required for a broad range of cars, SUVs, vans, and compatible light-duty pickups.
- Clear-floor overhead design keeps the work area open: Hydraulic lines and equalization components are routed overhead, eliminating a floorplate between the columns and making it easier to move tools, transmission jacks, and service equipment beneath the vehicle.
- Dual direct-drive cylinders deliver controlled lifting: A hydraulic cylinder in each column acts directly on its carriage, while cable equalization helps both sides travel together throughout the lifting cycle.
- Versatile arm reach improves vehicle coverage: Three-stage front arms and two-stage rear arms provide the positioning range needed to access different wheelbases and manufacturer-approved lifting points.
- Low 4.5-inch minimum pad height reaches lower vehicles: The screw-up pads can access many cars with limited ground clearance while still providing up to 70.9 inches of lifting height.
- Automatic locks support safer operation: Mechanical safety locks engage as the lift rises and can be released from a single operating point.
- Overhead shutoff helps protect taller vehicles: An integrated height-limit switch stops upward travel if a vehicle approaches the overhead structure.
- Vehicle-contact protection is included: Rubber door guards help reduce the risk of door damage when technicians enter or exit a vehicle between the columns.
- Truck adapters expand service flexibility: Included adapters provide additional contact height when working with compatible trucks and other higher-frame vehicles.
- Standard single-phase shop power: The 3 HP power unit operates on 240V single-phase service, avoiding the need for three-phase electrical power.
- Powder-coated construction withstands shop conditions: The protective finish helps resist corrosion and routine wear in an indoor service environment.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Daytona Automotive Equipment |
| Model | LTPA10 |
| Lift Type | Adjustable-width, 2-post overhead lift |
| Rated Lifting Capacity | 10,000 lbs (4,536 kg) |
| Arm Configuration | Three-stage front arms; two-stage rear arms |
| Lifting Range | 4.5"–70.9" (115–1,800 mm) |
| Overall Height | 141.6" (3,596 mm), including overhead bar |
| Clearance Under Overhead Beam | 134.2" (3,407 mm) |
| Overall Floor Width | 126.8" / 132.7" / 138.6" (3,220 / 3,370 / 3,520 mm) |
| Width at Columns | 118.9" / 124.8" / 130.7" (3,020 / 3,170 / 3,320 mm) |
| Width Between Columns | 100.8" / 106.7" / 112.6" (2,560 / 2,710 / 2,860 mm) |
| Drive-Through Clearance | 88.6" / 94.5" / 100.4" (2,250 / 2,400 / 2,550 mm) |
| Front Arm Reach | 21.6"–44.3" (550–1,125 mm) |
| Rear Arm Reach | 31.5"–49.2" (800–1,250 mm) |
| Control Box Height | 67.9" (1,725 mm) |
| Column Base Dimensions | 15.7" × 19.5" (400 × 495 mm) |
| Column Width | 9.1" (230 mm) |
| Base Plate Thickness | 0.6" (16 mm) |
| Drive System | Dual direct-drive 6-foot hydraulic cylinders with cable equalization |
| Safety System | Automatic safety locks with single-point release and overhead height-limit switch |
| Power Requirement | 240V, 3 HP, 13A, single phase, 60Hz |
| Minimum Concrete Requirement | 8" (203 mm) thick, 3,000 PSI minimum compressive strength |
| Lift Shipping Dimensions | 145" × 30" × 26" |
| Lift Shipping Weight | 1,700 lbs |
| Power-Unit Shipping Dimensions | 31" × 12" × 11" |
| Power-Unit Shipping Weight | 60 lbs |
| Included Accessories | Truck adapters, screw-up pads, and rubber door guards |
| Optional Accessory | LTPA10-EXT 2-foot height-extension kit, sold separately |
| Certification | Not listed as ALI Certified |
Installation Requirements
- Indoor installation only
- Recommended minimum ceiling height: 12'3"
- Recommended bay width: 13'
- Minimum 8-inch, 3,000 PSI concrete foundation
- Floor level within 3/8 inch across the installation area
- Dedicated 240V, single-phase electrical circuit
- Professional installation according to Daytona’s current installation manual and all applicable codes
Concrete suitability must be verified before anchoring. Actual requirements may vary based on slab condition, local building codes, and seismic regulations.
Warranty
The Daytona LTPA10 is backed by Daytona’s 5-2-1 limited warranty:
- 5 years on structural components
- 2 years on electrical components, hydraulic cylinders, and seal kits
- 1 year on defective parts
Warranty coverage is subject to Daytona’s current terms, exclusions, indoor-use requirement, and installation guidelines.
Shipping information
Free standard curbside freight shipping is available on most orders within the contiguous United States. Most orders are processed within 1–5 business days, with typical transit times of 5–8 business days after shipment.