Skip to content

Daytona BR10 10,000 lb ALI Certified 2-Post Lift

Original price $4,760.00 - Original price $4,760.00
Original price
$4,760.00
$4,760.00 - $4,760.00
Current price $4,760.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Daytona BR10 is a 10,000 lb overhead two-post lift and Daytona's only ALI Certified model. It uses dual direct-drive cylinders and 3-stage arms that set up symmetric or asymmetric, and it installs at one of three widths.

Shipping information

The delivery fee in your cart is an estimate. Freight is calculated by our warehouse after ordering; we'll confirm the delivery cost before charging your card.
A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
10,000 lbs
Power
3 HP, 12A, single phase, 60Hz, 220/240V
Overall height
144.5"
Overall width
140.43" / 146.34" / 152.24" (3 installation settings)
Warranty
Daytona 5-2-1 Limited

Why Choose the Daytona BR10

  • ALI Certified

    It is the only ALI Certified lift in Daytona's range.

  • Rated capacity

    The 10,000 lb rated capacity covers cars, SUVs and light-duty trucks within the rating.

  • Direct-drive cylinders

    The lift uses dual direct-drive hydraulic cylinders with cable equalization.

  • Three-stage arms

    The 3-stage arms allow symmetric or asymmetric lifting.

  • Three installation widths

    Overall width can be 140.43", 146.34" or 152.24".

  • Truck adapters

    Truck adapters are included.

Product Overview

When Certification Matters

ALI certification means the lift model has been independently tested against the ANSI/ALI safety and performance standard. Some insurers, employers and building inspectors ask for it, and the BR10 is the Daytona lift to choose when they do.

Overhead Design, Clear Floor

The BR10 carries its lines through an overhead bar, so the floor between the posts stays open for transmission jacks, drain pans and carts. The lift stands 144.5" tall, so check your ceiling before ordering.

Lifting System

Each post has a direct-drive hydraulic cylinder, and cable equalization keeps both carriages travelling together. The 3-stage arms can be set up for symmetric or asymmetric lifting, and truck adapters come standard.

Three Widths

The BR10 installs at one of three widths: 140.43", 146.34" or 152.24" overall. A narrower setting saves floor space; a wider one gives larger vehicles more room between the posts.

Specifications

SpecificationValue
ModelBR10
Lift type2-post overhead
CertificationALI Certified
Rated capacity10,000 lbs
Overall height144.5"
Overall width140.43" / 146.34" / 152.24" (3 installation settings)
DriveDual direct-drive hydraulic cylinders with cable equalization
Arms3-stage, symmetric or asymmetric
LocksAutomatic safety locks, single-point release
Truck adaptersIncluded
Power3 HP, 12A, single phase, 60Hz, 220/240V
Optional height kit2-ft extension kit, 200 lbs (sold separately)
Shipping142" × 23" × 44", 2,100 lbs

What's Included

  • BR10 lift (two posts, overhead bar, carriages and 3-stage arms)
  • Hydraulic power unit
  • Truck adapters

Not included: Height extension kit (sold separately), anchors and installation.

Best For

  • Repair shops, dealerships and fleet facilities that require an ALI Certified lift
  • Bays servicing cars, SUVs and light-duty trucks within 10,000 lbs
  • Garages with at least 144.5" of clear height for the lift itself

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift is 144.5" tall. Measure to the lowest obstruction and confirm against the lift blueprint before installation.
Width
Choose one of the three installation widths (140.43", 146.34" or 152.24") to suit the bay.
Concrete
Follow the slab, floor-level and anchor requirements in the installation manual supplied with the BR10, and have the slab verified before anchoring.
Location
Indoor installation only, as Daytona's warranty requires.
Electrical
3 HP, 12A, single phase, 60Hz on a 220/240V circuit. Confirm against the power unit's data plate, and have a licensed electrician provide the circuit.
Hydraulic
Hydraulic: direct-drive cylinder in each post. Use the fluid specified in the manual supplied with the lift.

Warranty

Daytona 5-2-1 Limited Warranty: 5 years on structural components, 2 years on power units, cylinders and seal kits, and 1 year on other defective parts, minus exclusions. Coverage starts on the purchase-invoice date, applies to the original owner, and requires indoor installation and maintenance as set out in the owner's manual. Wear items such as cables, hoses, slider blocks, chains and rubber pads are excluded. Warranty claims are started through Garage Lift Depot.

Shipment

Crate
Lift crate 142" × 23" × 44", 2,100 lbs.
Unloading
A forklift is required on site to unload; lifts are too heavy for liftgate delivery.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

The lift model has been independently tested and certified against the ANSI/ALI safety and performance standard. The BR10 is Daytona's only ALI Certified lift.

The lift is 144.5" tall. Measure to the lowest obstruction and confirm against the lift blueprint.

Three: 140.43", 146.34" or 152.24" overall.

Follow the installation manual supplied with the BR10 and have your slab verified before anchoring. A minimum slab figure for this model has not been confirmed.

Both are 10,000 lb overhead two-post lifts. Choose the BR10 when you need ALI certification; the LTPA10 is the alternative when you do not.

Related Equipment

Daytona BR10 Manual


Daytona BR10 Diagram View
Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare