Skip to content

Olympic 2PBP-10 10,000 lb 2-Post Baseplate Car Lift – Asymmetric Arms

Original price $4,648.00 - Original price $4,648.00
Original price
$4,648.00
$4,648.00 - $4,648.00
Current price $4,648.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Olympic 2PBP-10 is a 10,000 lb two-post baseplate lift with asymmetric arms. It lifts to 70.9", has 15 locking positions, stands 110.2" tall, and comes with the HPU2203 3 HP / 2.2 kW 220V single-phase power unit and four 3.5" truck adapters.

Shipping information

A forklift is required on site.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
10,000 lb
Power
HPU2203, 3 HP / 2.2 kW, 220V 60Hz single-phase
Overall height
110.2"
Overall width
130"
Maximum lifting height
70.9"

Why Choose the Olympic 2PBP-10

  • Asymmetric arms

    Asymmetric arms let you set a car back between the columns so the doors open with more room.

  • Overall height

    The 110.2" overall height suits garages where a taller lift will not fit. Allow additional clearance above the columns.

  • Rated capacity

    The lift has a 10,000 lb rated capacity.

  • Pad height and locks

    It has a 3.9" minimum pad height and 15 locking positions.

  • Truck adapters

    Four 3.5" truck adapters are included.

  • Load testing

    The lift is load-tested at 150% of its rated capacity.

Product Overview

Asymmetric Arms on a Baseplate Lift

The 2PBP-10 pairs a baseplate design with asymmetric arms, with front arm reach of 30"–47.3". Positioning a vehicle asymmetrically moves the doors clear of the columns, which makes getting in and out of the car easier once it is on the lift.

Height and Footprint

The lift stands 110.2" tall, with 110.2" between posts and 130" overall width. It lifts to 70.9", with rise or lowering taking approx. 55 seconds. Check the full raised height of your tallest vehicle against the ceiling, door tracks and lights.

Adapters and Accessories

Four 3.5" truck adapters and swing-arm supports with pads come with the lift. Olympic sells a 6" truck adapter set (4PTA-6), a frame cradle set (2PFC), the APU air/power utility station and anchoring epoxy separately.

Specifications

SpecificationValue
ModelOlympic 2PBP-10
Lift type2-post baseplate lift, asymmetric arms
Rated capacity10,000 lb
Maximum lifting height70.9"
Minimum pad height3.9"
Locking positions15
Front arm reach30"–47.3"
Overall height110.2"
Overall width130"
Width between posts110.2"
Rise / lowering timeApprox. 55 seconds
PowerHPU2203, 3 HP / 2.2 kW, 220V 60Hz single-phase

What's Included

  • Olympic 2PBP-10 two-post baseplate lift
  • HPU2203 power unit
  • Four 3.5" truck adapters
  • Swing-arm supports with pads
  • Door anti-crush rubber
  • Mounting hardware

Sold separately: 4PTA-6 6" truck adapter set, 2PFC frame cradle set, APU air/power utility station, anchoring epoxy.

Not included: Installation.

Best For

  • Home garages and small shops with limited ceiling height
  • Owners who want asymmetric arm positioning for easier door opening
  • Shops servicing vehicles up to 10,000 lb

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift is 110.2" tall. Allow additional clearance above the columns for the raised vehicle and any obstructions.
Floor
Level concrete with no more than a 3° slope, no cracks or expansion seams.
Concrete
At least 6.3" thick, minimum 3,000 psi, fully cured (new concrete at least 28 days). Anchor holes are approx. 4.72" deep.
Electrical
HPU2203 power unit: 3 HP / 2.2 kW, 220V 60Hz single-phase.
Electrical
Run a dedicated circuit with a 25 A time-delay fuse or breaker (208–230V single-phase) and minimum 10-gauge wire.
Electrical
Never operate the motor below 208V.
Electrical
Wiring by a licensed electrician.

Warranty

Olympic warranty: 10 years on major structural components; 3 years on electric and pneumatic power units, hydraulic cylinders, cables, hoses, locks, pulleys, sheaves and bushings; 1 year on wear parts such as pads, slide blocks and rubber components. Coverage begins on the date of shipment, applies to the original purchaser, requires professional installation, and does not include labor.

Frequently Asked Questions

110.2" overall. Allow additional clearance above the columns for the vehicle and any overhead obstructions.

70.9" maximum, from a 3.9" minimum pad height, with 15 locking positions.

Front arm reach is 30"–47.3".

A dedicated 208–230V single-phase circuit with a 25 A time-delay fuse or breaker and at least 10-gauge wire, wired by a licensed electrician. Do not run the motor below 208V.

At least 6.3" thick, minimum 3,000 psi, fully cured (new concrete at least 28 days), level to within 3°, with no cracks or expansion seams. Anchor holes are approx. 4.72" deep.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare