Skip to content

Triumph NT-9 9,000 lb 2-Post Floor Plate Lift, 110V

by Triumph
Original price $1,900.00 - Original price $1,900.00
Original price
$1,900.00
$1,900.00 - $1,900.00
Current price $1,900.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Triumph NT-9 is a 9,000 lb two-post floor plate lift that runs on 110V power. At 111" tall it suits garages where an overhead bar will not clear the ceiling, and it lifts to 72" with a 4.5" lowered pad height for lower cars.

Shipping information

Ships to the lower 48 states. Deliveries to island locations are quoted separately.
Residential, limited-access and some rural or metro-area addresses may carry an additional delivery charge.

At a Glance

Rated capacity
9,000 lbs
Power
110V, 3 HP, 30 amp circuit
Overall height
111"
Overall width
132"
Lifting height
72"

Why Choose the Triumph NT-9

  • Runs on 110V power

    The 3 HP power unit runs on 110V with a 30 amp circuit, so many home garages can power it without a 220V run.

  • Lower overall height

    The lift stands 111" tall, lower than Triumph's overhead two-post lifts.

  • Floor plate design

    A floor plate covers the cables and hydraulic hose between the posts.

  • Three-stage front arms

    The front arms extend in three stages to reach the lift points on a wide range of vehicles.

  • Low pickup height

    The arms lower to 4.5" to get under many lowered cars.

Product Overview

A Two-Post Lift for Lower Ceilings

Overhead two-post lifts need a tall ceiling for the top bar. The NT-9 routes its cables and hose through a floor plate instead, which keeps the lift at 111" tall. The trade-off is a low plate on the floor between the posts that jacks and carts roll over.

Working Room

The posts are 106" apart at mirror height and the drive-through width is 96" at the tires. The arms lift to 72" in about 40 seconds.

Locks

The NT-9 uses a dual-point lock release, so each post's lock is released separately before lowering. It has no electric overhead safety shut-off, which is a feature of the overhead models.

Specifications

SpecificationValue
ModelNT-9
Lift type2-post floor plate
Rated capacity9,000 lbs
Overall height111"
Overall width132"
Distance between posts106"
Drive-through width96"
Lifting height72"
Lowered height4.5"
Base plate size19" × 17"
Lock releaseDual point
Electric safety cutoffNo
Lift time40 seconds
Power110V, 3 HP, 30 amp circuit
Truck adaptersIncluded
Shipping112" × 18" × 36", 1,303 lbs

What's Included

  • Triumph NT-9 lift (two posts, carriages and arms)
  • Hydraulic power unit and motor
  • Truck adapters
  • Floor mounting hardware

Not included: Installation.

Best For

  • Home and hobby garages with a 110V circuit
  • Small repair shops servicing cars, SUVs and light trucks within 9,000 lbs
  • Bays with too little ceiling height for an overhead two-post lift

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift stands 111" tall. Measure to the lowest obstruction, such as a door track or light, and leave room for the vehicle on the lift.
Floor
132" overall width with 106" between posts. Leave working room around the posts.
Concrete
Concrete rated at a minimum of 3,000 PSI. Slab thickness is not specified, so confirm it against the installation manual supplied with the lift and have the slab checked before anchoring.
Location
Indoor installation.
Electrical
110V, 3 HP, 30 amp circuit. A licensed electrician should confirm the circuit and breaker.
Hydraulic
Hydraulic: uses AW32 hydraulic fluid; follow the fill and maintenance steps in the manual supplied with the lift.

Warranty

The Triumph NT-9 is covered by Triumph's 1-year parts warranty and 1-year structural warranty against defects in materials or workmanship. Replacement parts and their shipping are covered; labor is not. The warranty does not cover normal wear, misuse, accidents, modifications, or damage from improper installation or maintenance.

Shipment

Crate
The lift by freight, crate approx. 112" × 18" × 36", 1,303 lbs shipping weight.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

Yes. It uses a 3 HP motor on 110V with a 30 amp circuit. Have a licensed electrician confirm the circuit.

111" overall. Measure to the lowest obstruction, such as a door track, before ordering.

Concrete rated at a minimum of 3,000 PSI. Slab thickness is not specified, so confirm it with the installation manual supplied with the lift.

Floor plate. The cables and hose run under a plate on the floor between the posts.

Yes. Truck adapters, the power unit and floor mounting hardware come with the lift.

Related Equipment

Ready to order the Triumph NT-9? Order online or contact Garage Lift Depot with your ceiling height, slab details and vehicles, and we will confirm the fit before it ships.

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare