Skip to content

Daytona LMS6 6,000 lb Mid-Rise Scissor Lift

Original price $2,071.00 - Original price $2,071.00
Original price
$2,071.00
$2,071.00 - $2,071.00
Current price $2,071.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Daytona LMS6 is a 6,000 lb mid-rise scissor lift with an ultra-thin profile. It clears 5.5" when lowered, lifts to 54", reaches full height in about 45 seconds, and runs on 120V power.

Shipping information

The delivery fee in your cart is an estimate. Freight is calculated by our warehouse after ordering; we'll confirm the delivery cost before charging your card.
A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
6,000 lbs
Power
120V, 1.5 HP, 15A, single phase, 60Hz
Maximum lifting height
54"
Warranty
Daytona 5-2-1 Limited

Why Choose the Daytona LMS6

  • Maximum lifting height

    The 54" maximum lifting height suits tire, brake and body work.

  • Low minimum clearance

    The 5.5" minimum clearance when lowered works for low vehicles.

  • Rated capacity

    The lift has a 6,000 lb rated capacity.

  • Extensions and pads included

    Height extensions and lifting pads are included, adding 2.5" to 8".

  • Double-cylinder design

    The double-cylinder design has a mechanical safety lock.

  • Power requirements

    It runs on 120V single-phase power (1.5 HP, 15A).

Product Overview

Lift Height Where You Need It

A mid-rise scissor lift raises the vehicle to a comfortable working height for wheels, brakes and body panels without the ceiling height of a full-rise post lift. The LMS6 lifts to 54" and gets there in about 45 seconds.

Low Enough for Low Cars

The ultra-thin design clears 5.5" when lowered, so lowered and sports cars can be driven over it.

Reaching Lifting Points

Height extensions and lifting pads come with the lift and add 2.5" to 8" at any height, so the pads can meet each vehicle's lifting points.

Lifting and Locking

Two cylinders raise the platform, and a mechanical safety lock holds it at working height. The platform is 63" long and 39" wide, on an 84" × 40" base.

Specifications

SpecificationValue
ModelLMS6
Lift typeMid-rise scissor lift
Rated capacity6,000 lbs
Maximum lifting height54"
Minimum clearance (lowered)5.5"
Platform height range4.5"–49.2"
Height extensions and padsIncluded; add 2.5"–8"
Rise time45 seconds
Platform63" L × 39" W
Base84" L × 40" W
Lifting systemDouble cylinder, mechanical safety lock
Power120V, 1.5 HP, 15A, single phase, 60Hz
ShippingLift 87" × 43" × 9", 900 lbs; pump 31" × 14" × 12", 80 lbs

What's Included

  • LMS6 scissor lift
  • Power unit (120V)
  • Height extensions and lifting pads

Not included: Installation.

Best For

  • Tire and brake shops wanting fast mid-height access
  • Detail and body shops working on wheels and lower panels
  • Home garages with ceilings too low for a full-rise lift

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
Add the height of the tallest vehicle to the 54" lifting height, and measure to the lowest obstruction.
Floor
An 84" × 40" base, plus room to drive on and work around the vehicle. Follow the floor requirements in the LMS6 installation manual supplied with the lift.
Location
Indoor installation only, as Daytona's warranty requires.
Electrical
120V, 1.5 HP, 15A, single phase, 60Hz. A licensed electrician should confirm the circuit.
Hydraulic
Hydraulic: double-cylinder design. Use the fluid specified in the manual supplied with the lift.

Warranty

Daytona 5-2-1 Limited Warranty: 5 years on structural components, 2 years on power units, cylinders and seal kits, and 1 year on other defective parts, minus exclusions. Coverage starts on the purchase-invoice date, applies to the original owner, and requires indoor installation and maintenance as set out in the owner's manual. Wear items such as cables, hoses, slider blocks, chains and rubber pads are excluded. Warranty claims are started through Garage Lift Depot.

Shipment

Crate
Lift crate 87" × 43" × 9", 900 lbs, plus the power unit (31" × 14" × 12", 80 lbs).
Unloading
A forklift is required on site to unload; lifts are too heavy for liftgate delivery.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

54" maximum lifting height. The platform itself travels from 4.5" to 49.2", and the included height extensions and pads make up the difference to the lifting points.

5.5" minimum clearance when lowered.

Yes. Height extensions and lifting pads come standard and add 2.5" to 8".

120V, 1.5 HP, 15A, single phase.

The LMS6 is a mid-rise lift for wheel, brake and body work at 54". Choose the LHS7 high-rise when you need to stand under the vehicle.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare