Skip to content

Triumph NTR-32 32,000 lb 4-Post Lift with 2 RJ-15 Rolling Jacks

by Triumph
Original price $27,595.00 - Original price $27,595.00
Original price
$27,595.00
$27,595.00 - $27,595.00
Current price $27,595.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

This package pairs the Triumph NTR-32 32,000 lb heavy-duty four-post lift with two Triumph RJ-15 15,000 lb rolling bridge jacks. The jacks ride on the runways to lift the wheels clear for tire, brake and suspension work, and the lift runs on 220V single-phase power.

Shipping information

Ships to the lower 48 states. Deliveries to island locations are quoted separately.
Residential, limited-access and some rural or metro-area addresses may carry an additional delivery charge.

At a Glance

Rated capacity
32,000 lbs
Power
220V single phase
Overall height
93.1"
Overall width
168.7"
Overall length
305.5" without ramps, 344.6" with ramps

Why Choose the Triumph NTR-32 with 2 × RJ-15

  • Rated capacity

    The lift is rated at 32,000 lbs for heavy trucks, buses and RVs within the rating.

  • Long runways

    The 295.2" × 24" runways take long-wheelbase vehicles.

  • Adjustable runway spacing

    The inside runway spacing adjusts from 48.75"–52.7".

  • Lock positions

    The lift has 9 lock positions.

  • Two rolling jacks included

    Two RJ-15 jacks, each rated at 15,000 lbs, ride on the runways for wheels-free work.

Product Overview

A Drive-On Lift for Heavy Vehicles

A four-post lift lets the driver park on the runways, which is faster and simpler than finding frame points on large trucks. The NTR-32 lifts to 70.8" and lowers to 9".

Size

The lift is 305.5" without ramps, 344.6" with ramps, 168.7" wide and 93.1" tall, with 139.2" between columns. Plan bay length and approach room before ordering.

Lock Release

The lock release is pneumatic, using four air cylinders, so the lift needs shop air in addition to 220V power.

Why Add Rolling Jacks

With the vehicle parked on the runways, the RJ-15 jacks lift an axle off the runways so the wheels hang free. Each jack lifts to 28.3" and fits runway spacing of 48.7"–55".

Specifications

SpecificationValue
ModelNTR-32
Lift type4-post heavy-duty drive-on
Rated capacity32,000 lbs
Overall height93.1"
Overall length305.5" without ramps, 344.6" with ramps
Overall width168.7"
Runway size295.2" × 24"
Width between runways48.75"–52.7"
Distance between columns139.2"
Maximum lifting height70.8"
Minimum height9" (minimum runway height)
Locking positions9
Lock releasePneumatic, 4 air cylinders
Power220V single phase
Shipping301" × 30" × 43", 9,037 lbs
Rolling jacks2 × Triumph RJ-15, 15,000 lbs each
Jack lifting height28.3"
Jack lowered height15.3"
Jack fits runway spacing48.7"–55"

What's Included

  • Triumph NTR-32 lift (four columns, runways and crossrails)
  • Power unit (220V single phase)
  • Two Triumph RJ-15 15,000 lb rolling bridge jacks
  • Height adapters for each jack: two sets of height adapters (5" and 6.75")

Not included: Installation.

Best For

  • Truck, bus and fleet service shops
  • RV and commercial vehicle service centers
  • Facilities with bay length for 305.5" of lift

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift stands 93.1" tall. Add the height of the tallest vehicle at 70.8" of lift.
Floor
Overall length is 305.5" without ramps, 344.6" with ramps and overall width is 168.7". Leave approach room to drive on.
Concrete
Minimum 6" concrete slab. Follow the installation manual supplied with the lift and have your slab checked before anchoring.
Location
Indoor installation.
Electrical
220V single phase. A licensed electrician should confirm the circuit and breaker.
Air
Pneumatic lock release requires shop air; the required air supply is not specified, so confirm with the installation manual.
Hydraulic
Hydraulic: uses AW32 hydraulic fluid; follow the fill steps in the manual supplied with the lift.

Warranty

The Triumph NTR-32 package is covered by Triumph's 1-year parts warranty and 1-year structural warranty against defects in materials or workmanship. Replacement parts and their shipping are covered; labor is not. The warranty does not cover normal wear, misuse, accidents, modifications, or damage from improper installation or maintenance. Hydraulic cylinders carry a 30-day full warranty, after which a seal kit is supplied.

Shipment

Crate
The lift by freight, crate approx. 301" × 30" × 43", 9,037 lbs, plus two RJ-15 jacks at 661 lbs each (51" × 33" × 17").

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

No. It runs on 220V single phase.

Yes. The lock release is pneumatic, using four air cylinders.

A minimum 6" slab. Follow the installation manual supplied with the lift and have the slab checked before anchoring.

295.2", with 24" wide runways.

Yes. Two RJ-15 jacks are included in this package.

Related Equipment

Ready to order the Triumph NTR-32 with 2 × RJ-15? Order online or contact Garage Lift Depot with your bay size and vehicles, and we will confirm the fit before it ships.

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare