Skip to content

Katool KT-X85 8,000 lb Mid-Rise Scissor Lift with Electric Lock Release

by Katool
Original price $2,399.00 - Original price $2,399.00
Original price
$2,399.00
$2,399.00 - $2,399.00
Current price $2,399.00
Voltage: 110V
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-X85 is an 8,000 lb dual-platform mid-rise scissor lift with an electric lock release, so the safety locks work without a compressed-air line. It raises to 40.15" (1020 mm), lowers to 4.25" (110 mm) and has an overall width of 76.77" (1950 mm). The hydraulic power unit runs on 110V or 220V single phase.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
8,000 lb
Power
110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW)
Overall width
76.77" (1950 mm)
Overall length
83.5" (2120 mm), platform extended
Runway size
Each platform 20.5" (520 mm) wide; 57" (1450 mm) long, extending to 83.5" (2120 mm)

Why Choose the Katool KT-X85

  • Electric lock release

    The safety locks are actuated by an electromagnet, so no compressed air is needed to release them.

  • Mid-rise working height

    The platforms raise to 40.15" (1020 mm) for wheel, brake and body work at a comfortable working height.

  • Low entry height

    The lift lowers to 4.25" (110 mm), and four ramp extensions are included.

  • Choice of power

    The 3.0 HP (2.2 kW) power unit runs on 110V or 220V single-phase service.

  • Automatic lock engagement

    The mechanical safeties engage automatically if the hydraulic system fails.

  • Mobile or fixed use

    The lift can be set up as a mobile or fixed-mount unit, with casters included for positioning.

Product Overview

Dual-Platform Mid-Rise Design

The KT-X85 lifts on two separate platforms, leaving the wheels free and the center of the underbody open between them. Each platform is 20.5" (520 mm) wide, with a platform length of 57" (1450 mm) that extends to 83.5" (2120 mm). The overall length is 83.5" (2120 mm) with the platforms extended.

Capacity and Vehicle Fit

Rated capacity is 8,000 lb. The platforms sit 31.88" (810 mm) apart, and travel runs from a 4.25" (110 mm) lowered height to 40.15" (1020 mm). Four 1" and four 2" lifting pads are included to build up contact with the vehicle's lifting points.

Electric Lock Release and Controls

Mechanical safety locks at each base are actuated by an electromagnet wired to the LOCK button. Pressing LOCK sets the lift onto the nearest mechanical safeties; to lower, press LOCK to disengage them, then press DOWN. Because the release is electric, the lift does not need a shop air connection for the locks. Raising takes 35 seconds or less, and lowering takes 45 seconds or more.

Power and Site

The 3.0 HP (2.2 kW) hydraulic power unit runs on 110V or 220V, 60 Hz, single phase, with a 30 A amperage requirement. The lift should sit on a level concrete slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days.

Specifications

SpecificationValue
ModelKT-X85
Lift typeDual-platform mid-rise scissor lift; mobile or fixed mount
Rated capacity8,000 lb
Maximum lifting height40.15" (1020 mm)
Minimum height4.25" (110 mm)
Overall width76.77" (1950 mm)
Overall length83.5" (2120 mm), platform extended
Runway sizeEach platform 20.5" (520 mm) wide; 57" (1450 mm) long, extending to 83.5" (2120 mm)
Platform gap31.88" (810 mm)
Lifting time35 seconds or less
Lowering time45 seconds or more
Lock releaseElectric (electromagnet); no compressed air needed for the locks
Safety locksMechanical, at each base; engage automatically on hydraulic failure
Power110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW)
Amperage requirement30 A
Hydraulic oilN32 or N46 anti-wear hydraulic oil, 10 L
Concrete requirement5.9" (150 mm) minimum, 3,000 PSI or more, aged at least 7 days

What's Included

  • Pump control panel
  • Ramp extensions (4)
  • Lifting pads 1" (4) and 2" (4)
  • Lever
  • Casters (1 front, 2 rear)

Best For

  • Garages and shops without a compressed-air line at the lift location
  • Tire, brake and suspension work where open wheel access matters
  • Bays that need a lift able to run on 110V or 220V single-phase power

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor
Level concrete; do not install on asphalt.
Concrete
Minimum 5.9" (150 mm) thick, rated 3,000 PSI or more, aged at least 7 days.
Bay
The lift measures 76.77" (1950 mm) wide by 83.5" (2120 mm) long with the platforms extended; allow room to drive on and work around the vehicle.
Electrical
110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW) power unit.
Electrical
Amperage requirement: 30 A. Have a licensed electrician confirm the circuit for the voltage you choose.
Electrical
Lock release is electric (electromagnet), wired to the LOCK button; no compressed-air connection is needed for the locks.
Hydraulic
Hydraulic oil: N32 or N46 anti-wear hydraulic oil, 10 L capacity.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

No. The KT-X85 uses an electric lock release actuated by an electromagnet, so no compressed air is needed for the locks.

The KT-X80 releases its locks pneumatically and needs shop air at 85–120 PSI. It also raises to 41.34" (1050 mm) and is 73.23" (1860 mm) wide, compared with 40.15" (1020 mm) and 76.77" (1950 mm) for the KT-X85.

Yes. The power unit runs on 110V or 220V, 60 Hz, single phase, with a 30 A amperage requirement. A licensed electrician should confirm the circuit.

Up to 40.15" (1020 mm). It lowers to 4.25" (110 mm).

A level slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days. Asphalt is not suitable.

The pump control panel, four ramp extensions, four 1" and four 2" lifting pads, a lever and three casters (one front, two rear).

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare