Skip to content

Katool KT-AM120SD 12,000 lb Asymmetric Clear-Floor 2-Post Lift

by Katool
Original price $2,799.00 - Original price $2,799.00
Original price
$2,799.00
$2,799.00 - $2,799.00
Current price $2,799.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-AM120SD is a 12,000 lb asymmetric clear-floor two-post lift with direct-drive cylinders and a single-point lock release. It lifts to 70.87" (1800 mm), stands 144" (3650 mm) tall overall with a 2400 mm drive-through width, and runs on a 220V, 60 Hz, single-phase power unit as standard.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
12,000 lbs (5500 kg)
Power
220V, 60 Hz, single phase (standard); 110V, 60 Hz, single phase optional
Overall height
144" (3650 mm)
Overall width
131.5" (3340 mm)
Maximum lifting height
70.87" (1800 mm)

Why Choose the Katool KT-AM120SD

  • Rated for 12,000 lbs

    The lift is rated at 12,000 lbs (5500 kg) for full-size pickups, vans and SUVs within its rating.

  • Asymmetric 2-stage arms

    The four arms are asymmetric with 2 stages, and an adjustable 3.94"–6" support adapter set is included.

  • Single-point lock release

    One release frees the mechanical safety locks on both posts.

  • Direct-drive cylinders

    Direct-drive hydraulic cylinders do the lifting in each post.

  • Clear-floor layout

    The cross beam sits overhead and carries a safety shutoff bar, leaving the floor open for jacks and carts.

  • Overall height to plan for

    The lift stands 144" (3650 mm) tall overall, so check that figure against your ceiling before ordering.

Product Overview

Asymmetric Clear-Floor Design

The KT-AM120SD is a two-post clear-floor lift with an overhead cross beam and asymmetric 2-stage arms. Direct-drive hydraulic cylinders raise the carriages, and the cross beam carries an overhead safety shutoff bar. Feet-protection guardrails with a tool box come with the lift.

Capacity and Fit

Rated capacity is 12,000 lbs (5500 kg). Pads start at a 4.3" (110 mm) minimum height and rise to a 70.87" (1800 mm) maximum lifting height. Drive-through width is 2400 mm, overall width is 131.5" (3340 mm), and overall height is 144" (3650 mm). An adjustable extended support adapter set (3.94"–6") is included for higher lifting points.

Locks and Controls

Mechanical safety locks engage a toothed bar in each post, and a single-point lock release frees them from one place. Lifting takes up to 50 seconds; lowering takes 20 seconds or more.

Power and Site

The 2.2 kW hydraulic power unit runs on 220V, 60 Hz, single phase as standard, and a 110V, 60 Hz, single-phase power unit is optional. The slab must be at least 5.9" (150 mm) thick and rated at 3,000 PSI or more. Net weight is 1,369 lbs (621 kg).

Specifications

SpecificationValue
ModelKT-AM120SD
Lift typeTwo-post clear-floor lift with cross beam
Rated capacity12,000 lbs (5500 kg)
Maximum lifting height70.87" (1800 mm)
Minimum height4.3" (110 mm)
Overall height144" (3650 mm)
Overall width131.5" (3340 mm)
Drive-through width2400 mm
Arm designAsymmetric arms, 2 stages
DriveDirect-drive hydraulic cylinders
Lock releaseSingle-point lock release
Lifting timeUp to 50 seconds
Lowering time20 seconds or more
Power220V, 60 Hz, single phase (standard); 110V, 60 Hz, single phase optional
Motor2.2 kW
Concrete requirementAt least 5.9" (150 mm) thick, 3,000 PSI or more
Net weight1,369 lbs (621 kg)

What's Included

  • Cross beam with overhead safety shutoff bar
  • 4 asymmetric lift arm assemblies (2-stage) with frame contact pads
  • 2 posts with extensions
  • Direct-drive hydraulic cylinders
  • Hydraulic power unit (220V, single phase)
  • Single-point lock release assembly with covers
  • Adjustable extended support adapter set, 3.94"–6"
  • Rubber door-opening protection pads
  • Feet-protection safety guardrails with tool box
  • Anchor bolts

Optional: 110V power unit upgrade; emergency hand pump; KT-MP2 lift height extensions (set of 4); KT-MP5 two-post lift frame cradle set.

Best For

  • Shops and garages servicing full-size pickups, vans and SUVs up to 12,000 lbs
  • Buyers who prefer asymmetric arms and a single-point lock release
  • Buildings that need a clear-floor lift with a 144" overall height

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Concrete
At least 5.9" (150 mm) thick, 3,000 PSI or more, reinforced with steel bar, level and aged at least 7 days. No asphalt, seams or cracks under the posts.
Anchoring
5 concrete anchor bolts per post, drilled with a sharp 19 mm bit to the anchor length; tighten with a torque wrench only (no impact tools) and shim no more than 5 mm.
Ceiling
No fixed figure. The ceiling must clear the lift's 144" (3650 mm) overall height, and it must also clear the 70.87" maximum lifting height plus your tallest vehicle plus at least 6" (152 mm). Keep the area free of overhead obstructions.
Bay
Leave room in front of and behind the lift for vehicles; maximum cantilever is about 4 m from the centerline in each direction.
Electrical
220V, 60 Hz, single phase (standard); 110V, 60 Hz, single-phase power unit optional.
Electrical
Motor: 2.2 kW. The lift needs a dedicated power line installed by a licensed electrician.
Electrical
Amperage is not specified; have a licensed electrician confirm the circuit from the data plate.
Hydraulic
Hydraulic oil: N32 or N46, 10 L oil capacity; change it 6 months after initial use, then yearly.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

The lift stands 144" (3650 mm) tall, so the ceiling must clear that. It must also clear the 70.87" maximum lifting height plus your tallest vehicle plus at least 6" of clearance.

One release frees the mechanical safety locks on both posts, so you can lower the lift from one position.

2400 mm. Overall width is 131.5" (3340 mm).

A dedicated 220V, 60 Hz, single-phase line for the standard 2.2 kW power unit, installed by a licensed electrician. A 110V power unit is optional. Amperage is not specified, so confirm the circuit from the data plate.

At least 5.9" (150 mm) of reinforced, level concrete rated at 3,000 PSI or more, aged at least 7 days, with no asphalt, seams or cracks.

An adjustable extended support adapter set (3.94"–6") and rubber door-opening protection pads. KT-MP2 height extensions and a KT-MP5 frame cradle set are optional.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare