Skip to content

Katool KT-B750 Wheel Balancer with Laser, Automatic Ruler and Wheel Guard

by Katool
Original price $1,490.00 - Original price $1,689.00
Original price
$1,490.00
$1,490.00 - $1,689.00
Current price $1,490.00
MC Adapters: No
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-B750 is a computerized wheel balancer with an automatic measurement ruler, a laser marker and a hood-type wheel guard that starts the spin when it closes. It runs on 110V single phase, balances at 180 rpm with ±1g balancing accuracy and a 7-second measuring time, and takes wheels up to 65 kg (143 lbs).

Shipping information

Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Power
110V, single phase (1PH)
Max wheel weight
<65 kg / 143 lbs
Rim diameter
<24"
Max tire diameter
<880 mm / 34.64"
Balancing accuracy
±1g

Why Choose the Katool KT-B750

  • Automatic A and D input

    The automatic measurement ruler enters the A and D values for you, so you don't key them in by hand.

  • Laser weight marker

    A laser marker shows where the balance weight goes on the rim.

  • Hood-start wheel guard

    Closing the composite splash guard starts the balancing spin.

  • Balancing performance

    It spins at 180 rpm, measures in 7 seconds and gives ±1g balancing accuracy.

  • Stiff frame and shaft

    A 3 mm steel body, 8 mm sensor supports and a hardened 36 mm threaded shaft help keep vibration down.

  • Built-in diagnostics

    Fault diagnosis and two-side self-calibration are built in, and the balancer ships factory-calibrated.

Product Overview

Automatic Measurement and Laser Marker

The KT-B750's automatic measurement ruler reads the A (distance) and D (diameter) values straight into the balancer, so they don't have to be keyed in by hand. After the 180 rpm spin, the laser marker shows the weight placement position on the rim. A full measuring cycle takes 7 seconds, and balancing accuracy is ±1g. Readouts switch between ounces and grams, and a dedicated key switches between millimeters and inches.

Wheel Guard, Display Panel and Balancing Modes

A composite splash guard (hood) comes with the machine, and closing it starts the balancing spin. The display panel mounts on its own support. The panel offers STD, ALU1–ALU5 and STA modes, plus an ALS mode. Other functions include optimization (OPT), a Fine key for exact values, duplicate START buttons and a balance-weight split (hidden weight) function that can be used in static mode.

Frame, Shaft and Electronics

The body is 3 mm steel with reinforced welding to reduce vibration, and the sensor supports are 8 mm bottom and side boards. Wheels mount on a hardened 36 mm threaded shaft with an extended design that supports wider wheels. The motor has a pure copper winding, and the computer board is moisture-proof, dust-proof and anti-static. Fault diagnosis and two-side self-calibration are built in. Also available with Katool's motorcycle wheel adapter (KT-MC2).

Specifications

SpecificationValue
ModelKT-B750
Power110V, single phase (1PH)
Motor0.25 kW
Rim diameter<24"
Wheel width15"
Max tire diameter<880 mm / 34.64"
Max wheel weight<65 kg / 143 lbs
Rim center hole diameter<135 mm / 5.31"
Balancing accuracy±1g
Balancing speed180 rpm
Measuring time7 s
Threaded shaftHardened 36 mm
Body / sensor support3 mm steel body; 8 mm sensor support (bottom and side boards)
Balancing modesSTD, ALU1, ALU2, ALU3, ALU4, ALU5, STA; ALS
UnitsOunce/gram; mm/inch

What's Included

  • Cones in 4 sizes: 5 7/16"–3 11/16", 4 1/8"–2 3/4", 3 1/8"–2 1/8", 2 3/8"–1 5/8"
  • Composite splash guard (hood) with hood support arm
  • Quick-lock hub nut with cap / pressure cup
  • Display panel (installed on site)
  • 100-gram calibration weight

Best For

  • Tire shops and garages that want automatic A and D entry and laser weight placement in one machine.
  • Bays balancing wheels up to 65 kg (143 lbs) and 880 mm (34.64") in overall diameter.
  • Shops on a 110V single-phase supply that want a hood-type wheel guard.

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor
Install on flat, stable ground with the balancer sitting solidly on its feet, not on a wooden pallet.
Anchoring
Secure the balancer to the floor with concrete screws at 4 locations.
Location
Keep the back panel 0.6 m from the wall and leave room on both sides. Allow room for the hood to swing.
Assembly
On site, secure the display panel, install the hood support arm (4 screws) and its two relay-switch connections, fit the bracket cover (2 screws), then slide the hood onto the arm and fasten it (1 screw).
Electrical
110V, single phase, 60 Hz; motor 0.25 kW.
Electrical
Plugs into a wall outlet, which must be grounded.
Electrical
Amperage and plug type are not specified. Have a licensed electrician check the data plate if you are unsure about your circuit.

Warranty

Katool covers this balancer with a 12-month warranty on all parts and product defects. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

Yes. The automatic measurement ruler enters the A and D values, and a laser marker shows where the weight goes.

It runs on 110V single phase, 60 Hz, from a grounded wall outlet, with a 0.25 kW motor.

Wheel weight must be under 65 kg (143 lbs), with an overall tire diameter under 880 mm (34.64").

Yes. Secure it to a flat, stable floor with concrete screws at 4 locations, and keep the back panel 0.6 m from the wall.

The KT-B750 is also available with Katool's motorcycle wheel adapter (KT-MC2). Contact Garage Lift Depot for details.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare