How To Choose: Tire Changers
What does a tire changer do?
A tire changer breaks the tire bead, holds the wheel in place and uses a mount/demount head to work the tire on and off the rim. Most shop machines use an electric motor to turn the wheel and compressed air for the bead breaker and clamps.
Main types of tire changing machine
| Type | How it works | Examples in our range |
|---|---|---|
| Swing-arm, rim clamp | Jaws clamp the rim on a turntable; the mount/demount head is on an arm that swings aside between wheels | Daytona TC-880, Katool KT-T810, Olympic T620 |
| Tilt-back / tilting column | The column tilts back to clear the wheel for loading and unloading | Daytona TC-890T, Katool KT-T850, Olympic T650, T-999E |
| Center post | The wheel is clamped through its center hole rather than gripped at the rim | Katool KT-T880, KT-T900 |
| Vertical press | The press head moves straight down onto the bead | Katool KT-T855 |
| Truck / heavy-duty | Larger clamping range and heavier drive for commercial and truck tires | Katool KT-TV910, KT-T160, KT-T260, KT-308 |
We also carry machines for motorcycle wheels and a hand-operated portable changer.
Assist arms
Assist arms hold the bead down while the wheel turns, which reduces the effort needed on stiff sidewalls. Models listed with assist arms include the Katool KT-T830 and KT-T835 and the Olympic T650 and T-999E.
Wheel size and clamping range
Check two numbers on the product page: the rim clamping range, inside and outside, and the maximum tire diameter. Choose a machine that covers your largest common wheel with room to spare.
Low-profile and run-flat tires
Low-profile and run-flat tires have stiff sidewalls that are harder to work. If they're a regular part of your work, look for assist arms and check the product page for run-flat and low-profile capability.
Truck and heavy-duty tires
Commercial and truck tires need a dedicated heavy-duty machine with a much larger clamping range. Plan floor space, lifting and power in advance; some truck machines need 220V or three-phase power.
Air and electrical requirements
Most shop tire changers need both compressed air and electricity. Check the required air pressure, voltage, phase and breaker size on each product page, and confirm your compressor can keep up.
Tire changer or a changer-and-balancer package?
If you're setting up a new tire bay, a matched package saves pairing two machines yourself. See our tire changer and balancer combos, or browse wheel balancers on their own.
Home garage vs. professional tire shop
For occasional home-garage use, an entry swing-arm machine may be enough. Shops doing tire work every day usually benefit from assist arms, a bead blaster or a tilt-back column.
What to check before buying
- Your largest common rim diameter and wheel width
- The tire types you work on: low-profile, run-flat, light truck or commercial
- Air compressor output and pressure
- Voltage, phase and breaker size
- Floor space and room to work around the machine
Frequently Asked Questions
They're the same thing. "Tire machine" and "tire changing machine" are common names for a tire changer.
If you regularly mount stiff, low-profile or run-flat tires, an assist arm makes the job easier and reduces strain. For mostly standard passenger tires, a machine without one may be enough.
Some car machines offer an optional motorcycle adaptor; check the product page. We also carry machines built for motorcycle wheels.
Most powered models do, for the bead breaker and clamps. Check the air pressure requirement on each product page.
Yes. Send us your typical rim sizes, tire types, compressor and electrical service, and we'll recommend models that fit.