Skip to content

Katool KT-X80 8,000 lb Pneumatic Mid-Rise Scissor Lift

by Katool
Original price $2,299.00 - Original price $2,299.00
Original price
$2,299.00
$2,299.00 - $2,299.00
Current price $2,299.00
Voltage: 110V
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-X80 is an 8,000 lb (3,500 kg) dual-platform mid-rise scissor lift for wheel, brake, suspension and body work. It raises to 41.34" (1050 mm), lowers to 4.25" (110 mm) and fits a 73.23" (1860 mm) wide footprint. The hydraulic power unit runs on 110V or 220V single phase, and the mechanical locks release pneumatically from shop air at 85–120 PSI.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
8,000 lb (3,500 kg)
Power
110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW)
Overall width
73.23" (1860 mm)
Overall length
80.16" (2036 mm), platform extended
Runway size
Each platform 19.69" (500 mm) wide; 56.3" (1430 mm) long, extending to 80.16" (2036 mm)

Why Choose the Katool KT-X80

  • Mid-rise working height

    The platforms raise to 41.34" (1050 mm), which puts wheels, brakes and rocker panels at a comfortable working height.

  • Low entry height

    The lift lowers to 4.25" (110 mm), and four ramp extensions are included for driving on.

  • Choice of power

    The 3.0 HP (2.2 kW) power unit runs on 110V or 220V single-phase service.

  • Pneumatic lock release

    Mechanical safety locks at each base are released by pneumatic cylinders from the control panel.

  • Automatic lock engagement

    The mechanical safeties engage automatically if the hydraulic system fails.

  • Mobile or fixed use

    The lift can be set up as a mobile or fixed-mount unit, with casters included for positioning.

Product Overview

Dual-Platform Mid-Rise Design

The KT-X80 lifts the vehicle on two separate platforms instead of columns or a single deck. That leaves the wheels free and opens the center of the underbody between the platforms, which is the usual reason shops and home garages choose a mid-rise scissor lift for tire, brake and suspension jobs. Each platform is 19.69" (500 mm) wide, with a platform length of 56.3" (1430 mm) that extends to 80.16" (2036 mm).

Capacity and Vehicle Fit

Rated capacity is 8,000 lb (3,500 kg). The platforms sit 33.86" (860 mm) apart, and the lift travels from a 4.25" (110 mm) lowered height to 41.34" (1050 mm). Four 1" and four 2" lifting pads are included to build up contact with the vehicle's lifting points.

Locks and Controls

The lift uses mechanical safety locks at each base, operated by pneumatic cylinders and controlled from the pump control panel. Pressing LOCK sets the lift onto the nearest mechanical safeties. To lower, press LOCK to disengage the locks, then press DOWN. Raising takes 35 seconds or less, and lowering takes 45 seconds or more.

Power, Air and Site

The 3.0 HP (2.2 kW) hydraulic power unit runs on 110V or 220V, 60 Hz, single phase, with a 30 A amperage requirement. Because the lock release is pneumatic, the lift needs shop air at 85–120 PSI (6–8 bar). It should sit on a level concrete slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days.

Specifications

SpecificationValue
ModelKT-X80
Lift typeDual-platform mid-rise scissor lift; mobile or fixed mount
Rated capacity8,000 lb (3,500 kg)
Maximum lifting height41.34" (1050 mm)
Minimum height4.25" (110 mm)
Overall width73.23" (1860 mm)
Overall length80.16" (2036 mm), platform extended
Runway sizeEach platform 19.69" (500 mm) wide; 56.3" (1430 mm) long, extending to 80.16" (2036 mm)
Platform gap33.86" (860 mm)
Lifting time35 seconds or less
Lowering time45 seconds or more
Lock releasePneumatic
Safety locksMechanical, at each base; engage automatically on hydraulic failure
Power110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW)
Amperage requirement30 A
Air supply85–120 PSI (6–8 bar)
Hydraulic oilN32 or N46 anti-wear hydraulic oil, 10 L
Concrete requirement5.9" (150 mm) minimum, 3,000 PSI or more, aged at least 7 days
Packed weightLift 1,179 lb (535 kg); power unit 110 lb (50 kg)

What's Included

  • Pump control panel
  • Ramp extensions (4)
  • Lifting pads 1" (4) and 2" (4)
  • Lever
  • Casters (1 front, 2 rear)

Best For

  • Tire, brake and suspension work where open wheel access matters
  • Shops and home garages that already have shop air on hand
  • Bays that need a lift able to run on 110V or 220V single-phase power

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor
Level concrete; do not install on asphalt.
Concrete
Minimum 5.9" (150 mm) thick, rated 3,000 PSI or more, aged at least 7 days.
Bay
The lift measures 73.23" (1860 mm) wide by 80.16" (2036 mm) long with the platforms extended; allow room to drive on and work around the vehicle.
Air
A shop air line at 85–120 PSI (6–8 bar) is needed at the lift.
Electrical
110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW) power unit.
Electrical
Amperage requirement: 30 A. Have a licensed electrician confirm the circuit for the voltage you choose.
Air
Requires shop air at 85–120 PSI (6–8 bar).
Hydraulic
Hydraulic oil: N32 or N46 anti-wear hydraulic oil, 10 L capacity.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

Yes. The safety locks are released pneumatically, so the lift needs shop air at 85–120 PSI (6–8 bar).

Yes. The power unit runs on 110V or 220V, 60 Hz, single phase. The amperage requirement is 30 A, and a licensed electrician should confirm the circuit.

Up to 41.34" (1050 mm). It lowers to 4.25" (110 mm).

A level slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days. Asphalt is not suitable.

The pump control panel, four ramp extensions, four 1" and four 2" lifting pads, a lever and three casters (one front, two rear).

The KT-X80 releases its locks pneumatically and needs shop air. The KT-X85 uses an electric lock release with no compressed air needed for the locks.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare