Skip to content

Triumph NTO-10A 10,000 lb 2-Post Overhead Lift

by Triumph
Original price $2,765.00 - Original price $2,765.00
Original price
$2,765.00
$2,765.00 - $2,765.00
Current price $2,765.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Triumph NTO-10A is a 10,000 lb overhead two-post lift with three-stage arms and a single-point lock release. It runs on 220V power, lifts to 72" and lowers to 4.5", with the power unit and floor mounting hardware included.

Shipping information

Ships to the lower 48 states. Deliveries to island locations are quoted separately.
Residential, limited-access and some rural or metro-area addresses may carry an additional delivery charge.

At a Glance

Rated capacity
10,000 lbs
Power
220V, 3 HP
Overall height
145"
Overall width
133"
Lifting height
72"

Why Choose the Triumph NTO-10A

  • Single-point lock release

    One handle releases the locks on both posts, which speeds up lowering.

  • Three-stage arms

    The arms extend in three stages to reach lift points on a wide range of vehicles.

  • Clear floor between posts

    The overhead bar carries the cables and hoses, leaving the floor open under the vehicle.

  • Electric safety cutoff

    An overhead cutoff switch stops the lift before a tall vehicle reaches the bar.

  • Power unit included

    The lift comes with its power unit, truck adapters and floor mounting hardware.

Product Overview

A 10,000 Lb Overhead Lift for General Service

The NTO-10A covers the range most shops and serious home garages work in: cars, SUVs, vans and light trucks within 10,000 lbs. The overhead bar keeps transmission jacks, oil drains and carts free to roll under the vehicle.

Size and Reach

The lift stands 145" tall and 133" wide. The posts are 107" apart and the drive-through width is 96". It lifts to 72" in about 40 seconds.

Locks and Safety

A single-point lock release frees both carriages from one side. The overhead cutoff switch helps keep tall vans and trucks off the top bar.

Specifications

SpecificationValue
ModelNTO-10A
Lift type2-post overhead
Rated capacity10,000 lbs
Overall height145"
Overall width133"
Distance between posts107"
Drive-through width96"
Lifting height72"
Lowered height4.5"
Base plate size18" × 17"
Lock releaseSingle point
Electric safety cutoffYes
Lift time40 seconds
Power220V, 3 HP
Truck adaptersIncluded
Shipping149" × 19" × 38", 1,511 lbs

What's Included

  • Triumph NTO-10A lift (two posts, carriages and arms, overhead bar)
  • Hydraulic power unit and motor
  • Truck adapters
  • Floor mounting hardware

Not included: Installation.

Best For

  • Independent repair shops and service bays
  • Home garages with 220V power and at least 145" of ceiling height
  • Fleet bays servicing cars, SUVs and vans within 10,000 lbs

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift stands 145" tall. Measure to the lowest obstruction, such as a door track or light, and leave room for the vehicle on the lift.
Floor
133" overall width with 107" between posts. Leave working room around the posts.
Concrete
Minimum 4" slab, 3,000 PSI. Follow the installation manual supplied with the lift and have your slab checked before anchoring.
Location
Indoor installation.
Electrical
220V, 3 HP. A licensed electrician should confirm the circuit and breaker.
Hydraulic
Hydraulic: uses AW32 hydraulic fluid; follow the fill and maintenance steps in the manual supplied with the lift.

Warranty

The Triumph NTO-10A is covered by Triumph's 1-year parts warranty and 1-year structural warranty against defects in materials or workmanship. Replacement parts and their shipping are covered; labor is not. The warranty does not cover normal wear, misuse, accidents, modifications, or damage from improper installation or maintenance. Hydraulic cylinders carry a 30-day full warranty, after which a seal kit is supplied.

Shipment

Crate
The lift by freight, crate approx. 149" × 19" × 38", 1,511 lbs shipping weight.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

220V with a 3 HP motor. Have a licensed electrician confirm the circuit and breaker.

145" overall. Measure your ceiling and door tracks before ordering.

A minimum 4" slab rated at 3,000 PSI.

Yes. One release frees both carriages.

The lift, power unit and motor, truck adapters and floor mounting hardware.

Related Equipment

Ready to order the Triumph NTO-10A? Order online or contact Garage Lift Depot with your ceiling height, slab details and vehicles, and we will confirm the fit before it ships.

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare