Skip to content

Katool KT-X90E 8,000 lb 47" Mid-Rise Scissor Lift with Electric Lock Release

by Katool
Original price $2,599.00 - Original price $2,599.00
Original price
$2,599.00
$2,599.00 - $2,599.00
Current price $2,599.00
Voltage: 110V
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-X90E is an 8,000 lb dual-platform mid-rise scissor lift that raises to 47.25" (1200 mm). It lowers to 4.33" (110 mm), has an overall width of approx. 75.2" (1910 mm) and uses an electric lock release, so no compressed air is needed for the locks. The hydraulic power unit runs on 110V or 220V single phase.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
8,000 lb
Power
110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW)
Overall width
Approx. 75.2" (1910 mm)
Overall length
83 55/64" (2130 mm)
Runway size
Each platform 20 55/64" (530 mm) wide; deck 61 1/32" (1550 mm) long, 83 55/64" (2130 mm) with ramps

Why Choose the Katool KT-X90E

  • Taller mid-rise reach

    The platforms raise to 47.25" (1200 mm) for more room under the vehicle.

  • Electric lock release

    The locks are released electrically from the LOCK button, with no compressed-air line needed for them.

  • Low entry height

    The lift lowers to 4.33" (110 mm), and four ramp extensions are included.

  • Five lock positions

    Mechanical safeties hold the lift at five lock positions and engage automatically if the hydraulic system fails.

  • Choice of power

    The 3.0 HP (2.2 kW) power unit runs on 110V or 220V single-phase service.

  • Caster kit included

    Casters let you position the lift and are removed once it is in place.

Product Overview

Dual-Platform Mid-Rise Design

The KT-X90E lifts on two separate platforms, leaving the wheels free and the center of the underbody open between them. Each platform is 20 55/64" (530 mm) wide. The platform deck is 61 1/32" (1550 mm) long, or 83 55/64" (2130 mm) with ramps.

Capacity and Lift Height

Rated capacity is 8,000 lb. Travel runs from a 4.33" (110 mm) lowered height to 47.25" (1200 mm), and the platforms sit 33 15/32" (850 mm) apart. Four 1" and four 2" lifting pads are included to build up contact with the vehicle's lifting points.

Electric Lock Release and Controls

Pressing LOCK sets the lift onto the nearest mechanical safeties, which are actuated electrically through an electromagnet. To lower, press LOCK to release the locks, then press DOWN. The installation uses a hydraulic line and electrical wiring only, with no pneumatic line. Raising takes 30 seconds or less, and lowering takes 30 seconds or more.

Power and Site

The 3.0 HP (2.2 kW) hydraulic power unit runs on 110V or 220V, 60 Hz, single phase, with a 30 A amperage requirement. The lift should sit on a level concrete slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days.

Specifications

SpecificationValue
ModelKT-X90E
Lift typeDual-platform mid-rise scissor lift
Rated capacity8,000 lb
Maximum lifting height47.25" (1200 mm)
Minimum height4.33" (110 mm)
Overall widthApprox. 75.2" (1910 mm)
Overall length83 55/64" (2130 mm)
Runway sizeEach platform 20 55/64" (530 mm) wide; deck 61 1/32" (1550 mm) long, 83 55/64" (2130 mm) with ramps
Platform gap33 15/32" (850 mm)
Lifting time30 seconds or less
Lowering time30 seconds or more
Lock releaseElectric; no compressed air needed for the locks
Safety locksMechanical, 5 lock positions; engage automatically on hydraulic failure
Power110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW)
Amperage requirement30 A
Hydraulic oilN32 or N46 anti-wear hydraulic oil, 10 L
Rated hydraulic pressure20 MPa
Concrete requirement5.9" (150 mm) minimum, 3,000 PSI or more, aged at least 7 days
Net weightLift 1,179 lb (535 kg); pump 110 lb (50 kg)

What's Included

  • Pump control panel
  • Ramp extensions (4)
  • Lifting pads 1" (4) and 2" (4)
  • Lever
  • Casters (1 front, 2 rear)

Optional: adjustable support bars, sold separately.

Best For

  • Work that benefits from extra height under the vehicle on a mid-rise lift
  • Garages and shops without a compressed-air line at the lift location
  • Bays that need a lift able to run on 110V or 220V single-phase power

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor
Level concrete; do not install on asphalt.
Concrete
Minimum 5.9" (150 mm) thick, rated 3,000 PSI or more, aged at least 7 days.
Bay
The lift measures approx. 75.2" (1910 mm) wide by 83 55/64" (2130 mm) long; allow room to drive on and work around the vehicle.
Electrical
110V or 220V, 60 Hz, single phase; 3.0 HP (2.2 kW) power unit.
Electrical
Amperage requirement: 30 A. Have a licensed electrician confirm the circuit for the voltage you choose.
Electrical
Lock release is electric, wired to the LOCK button; no compressed-air connection is needed for the locks.
Hydraulic
Hydraulic oil: N32 or N46 anti-wear hydraulic oil, 10 L capacity; rated hydraulic pressure 20 MPa.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

Up to 47.25" (1200 mm). It lowers to 4.33" (110 mm).

No. The lock release is electric, and the installation uses a hydraulic line and electrical wiring only.

Yes. The power unit runs on 110V or 220V, 60 Hz, single phase, with a 30 A amperage requirement. A licensed electrician should confirm the circuit.

The lift is approx. 75.2" (1910 mm) wide and 83 55/64" (2130 mm) long. Allow extra room to drive on and work around the vehicle.

A level slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days. Asphalt is not suitable.

Both use an electric lock release and carry 8,000 lb. The KT-X90E raises to 47.25" (1200 mm), while the KT-X85 raises to 40.15" (1020 mm).

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare