Skip to content

Daytona LTPF9 9,000 lb 2-Post Floorplate Lift

Original price $2,679.00 - Original price $2,679.00
Original price
$2,679.00
$2,679.00 - $2,679.00
Current price $2,679.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Daytona LTPF9 is a 9,000 lb two-post lift with a floorplate between the posts instead of an overhead bar. At 110" overall height, it is the shortest two-post lift in Daytona's range, and it runs on 240V single-phase power.

Shipping information

The delivery fee in your cart is an estimate. Freight is calculated by our warehouse after ordering; we'll confirm the delivery cost before charging your card.
A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
9,000 lbs
Power
240V, 3 HP, 13A, single phase, 60Hz
Overall height
110.0"
Warranty
Daytona 5-2-1 Limited

Why Choose the Daytona LTPF9

  • Rated capacity

    The lift has a 9,000 lb rated capacity for cars, crossovers and light trucks within the rating.

  • Overall height

    Overall height is 110", with no overhead bar to clear.

  • Chain-over-hydraulic cylinders

    Chain-over-hydraulic cylinders lift both carriages from the power unit.

  • Single-point lock release

    A single-point lock release drops the locks from one side.

  • Truck adapters included

    Truck adapters are included for vehicles with higher frame points.

  • Power requirements

    The lift runs on 240V single-phase power (3 HP, 13A).

Product Overview

Height Is the Reason to Choose a Floorplate

Overhead two-post lifts need clearance above the posts for their crossbar. The LTPF9 runs its connecting lines through a plate on the floor instead, which keeps the whole lift at 110" tall. In a garage or bay where an overhead model will not fit, that is the difference between a two-post lift and no lift at all. The trade-off is a low plate across the floor between the posts.

How It Lifts

Daytona drives the LTPF9 with chain-over-hydraulic cylinders. Locks are released from a single point, so the operator does not walk around the lift to free each side before lowering.

Adapters

Truck adapters come standard, for vehicles whose frame lifting points sit higher than a car's.

Specifications

SpecificationValue
ModelLTPF9
Lift type2-post floorplate
Rated capacity9,000 lbs
Overall height110.0"
Minimum lifting height4.5"
DriveChain over hydraulic cylinders
Lock releaseSingle-point
Truck adaptersIncluded
Power240V, 3 HP, 13A, single phase, 60Hz
ShippingLift 114" × 18" × 30", 1,300 lbs; pump 31" × 11" × 12", 60 lbs

What's Included

  • LTPF9 lift (two posts, floorplate, carriages and arms)
  • Hydraulic power unit (240V single phase)
  • Truck adapters

Not included: Installation and anchors.

Best For

  • Home and hobby garages where an overhead two-post lift is too tall
  • Small repair shops servicing cars and light trucks within 9,000 lbs
  • Bays with low obstructions above the lift area

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift is 110.0" tall. Your ceiling must also clear the vehicle at the height you plan to work, so measure to the lowest obstruction before ordering.
Concrete
Follow the slab, floor-level and anchor-placement requirements in the LTPF9 installation manual supplied with the lift, and have the slab verified before anchoring.
Location
Indoor installation only, as Daytona's warranty requires.
Electrical
240V, 3 HP, 13A, single phase, 60Hz. A licensed electrician should confirm the circuit and breaker.
Hydraulic
Hydraulic: chain-over-hydraulic cylinders. Use the fluid specified in the manual supplied with the lift.

Warranty

Daytona 5-2-1 Limited Warranty: 5 years on structural components, 2 years on power units, cylinders and seal kits, and 1 year on other defective parts, minus exclusions. Coverage starts on the purchase-invoice date, applies to the original owner, and requires indoor installation and maintenance as set out in the owner's manual. Wear items such as cables, hoses, slider blocks, chains and rubber pads are excluded. Warranty claims are started through Garage Lift Depot.

Shipment

Crate
Lift crate 114" × 18" × 30", 1,300 lbs, plus the power unit (31" × 11" × 12", 60 lbs).
Unloading
A forklift is required on site to unload; lifts are too heavy for liftgate delivery.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

110.0" overall. There is no overhead bar, which is why it suits lower bays than Daytona's overhead models.

Follow the requirements in the LTPF9 installation manual supplied with the lift and have your slab checked before anchoring. Slab figures for the LTPF9 conflict, so we do not quote one here; confirm the requirement with Garage Lift Depot before ordering.

Yes. As a floorplate lift, it has a low plate across the floor between the posts. Rolling equipment passes over it.

The LTPF12 adds 3,000 lbs of capacity and is wider and taller (155.5" wide, 114.0" tall). The LTPF9 is the smaller, lower-cost option.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare