Skip to content

Katool KT-X77 7,000 lb Mid-Rise Scissor Lift

by Katool
Original price $1,899.00 - Original price $1,899.00
Original price
$1,899.00
$1,899.00 - $1,899.00
Current price $1,899.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Katool KT-X77 is a 7,000 lb (3,200 kg) dual-platform mid-rise scissor lift for wheel, brake, suspension and body work. It raises to 39.37" (1000 mm), lowers to 4.25" (110 mm) and fits a 72.83" (1850 mm) wide footprint. The 3.0 HP (2.2 kW) power unit runs on 110V or 220V single phase, and the lift requires shop air at 85–120 PSI.

Shipping information

A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
7,000 lb (3,200 kg)
Power
110VAC or 220VAC, 60 Hz, single phase; 3.0 HP (2.2 kW)
Overall width
72.83" (1850 mm)
Overall length
81.5" (2070 mm), platform extended
Runway size
Each platform 20.87" (530 mm) wide; deck 1400 mm, 1900 mm with ramps

Why Choose the Katool KT-X77

  • Mid-rise working height

    The platforms raise to 39.37" (1000 mm), bringing wheels, brakes and rocker panels up to working height.

  • Low entry height

    The lift lowers to 4.25" (110 mm), and four ramp extensions are included for driving on.

  • Choice of power

    The 3.0 HP (2.2 kW) power unit runs on 110V or 220V single-phase service.

  • Mobile or fixed use

    Casters are included, so the lift can be used as a mobile unit or set in place as a fixed mount.

  • Open center access

    The two platforms sit 31.1" (790 mm) apart, leaving the center of the underbody open.

  • Mechanical safety locks

    Two mechanical safety locks are supplied and set in place once the lift is raised.

Product Overview

Dual-Platform Mid-Rise Design

The KT-X77 lifts the vehicle on two separate platforms rather than columns or a single deck. That leaves the wheels free for tire and brake work and opens the center of the underbody between the platforms. Each platform is 20.87" (530 mm) wide. The deck is 1400 mm long, 1900 mm with ramps, and 2070 mm (81.5") overall.

Capacity and Vehicle Fit

Rated capacity is 7,000 lb (3,200 kg). The platforms sit 31.1" (790 mm) apart, and the lift travels from a 4.25" (110 mm) lowered height to 39.37" (1000 mm). Four rubber lift pads are included for contact with the vehicle's lifting points. Lifting time is 30 seconds, and lowering takes 45 seconds or more.

Locks and Controls

Two mechanical safety locks are supplied with the lift and are installed once the lift is raised. To lower, press UP to raise the lift slightly, remove the safety locks, then push the DOWN lever on the power unit.

Power, Air and Site

The 3.0 HP (2.2 kW) hydraulic power unit runs on 110VAC or 220VAC, 60 Hz, single phase, with a 30 A amperage requirement. The lift requires shop air at 85–120 PSI (6–8 bar). It should sit on a level concrete slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days; asphalt is not suitable.

Specifications

SpecificationValue
ModelKT-X77
Lift typeDual-platform mid-rise scissor lift; mobile or fixed mount
Rated capacity7,000 lb (3,200 kg)
Maximum lifting height39.37" (1000 mm)
Minimum height4.25" (110 mm)
Overall width72.83" (1850 mm)
Overall length81.5" (2070 mm), platform extended
Runway sizeEach platform 20.87" (530 mm) wide; deck 1400 mm, 1900 mm with ramps
Platform gap31.1" (790 mm)
Lifting time30 seconds
Lowering time45 seconds or more
Safety locksMechanical (2 supplied)
Power110VAC or 220VAC, 60 Hz, single phase; 3.0 HP (2.2 kW)
Amperage requirement30 A
Air supply85–120 PSI (6–8 bar)
Hydraulic oilN32 or N46 anti-wear hydraulic oil, 10 L
Concrete requirement5.9" (150 mm) minimum, 3,000 PSI or more, aged at least 7 days
Noise75 dB(A) or less
Net weight1,059 lb (480 kg)

What's Included

  • Ramp extensions (4)
  • Lever
  • Caster wheels (1 front, 2 rear)
  • Safety locks (2)
  • Power unit on lock stand (handle, post and base)
  • Hydraulic oil pipe
  • Rubber lift pads (4)
  • Hardware
  • Installation manual

Best For

  • Tire, brake and suspension work where open wheel access matters
  • Shops and home garages with shop air and 110V or 220V single-phase power
  • Vehicles up to 7,000 lb that need a 39.37" mid-rise working height

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor
Level concrete; do not install on asphalt.
Concrete
Minimum 5.9" (150 mm) thick, rated 3,000 PSI or more, aged at least 7 days.
Bay
The lift measures 72.83" (1850 mm) wide by 81.5" (2070 mm) long with the platforms extended; allow room to drive on and work around the vehicle.
Air
A shop air line at 85–120 PSI (6–8 bar) is needed at the lift.
Electrical
110VAC or 220VAC, 60 Hz, single phase; 3.0 HP (2.2 kW) power unit.
Electrical
Amperage requirement: 30 A. Have a licensed electrician confirm the circuit for the voltage you choose.
Air
Requires shop air at 85–120 PSI (6–8 bar).
Hydraulic
Hydraulic oil: N32 or N46 anti-wear hydraulic oil, 10 L capacity.

Warranty

Katool covers this lift with a 1-year warranty on all parts and a 3-year warranty on structural components. Labor is not included. Contact Garage Lift Depot for warranty support.

Frequently Asked Questions

Yes. The lift requires shop air at 85–120 PSI (6–8 bar).

Yes. The power unit runs on 110VAC or 220VAC, 60 Hz, single phase. The amperage requirement is 30 A, and a licensed electrician should confirm the circuit.

Up to 39.37" (1000 mm). It lowers to 4.25" (110 mm).

A level slab at least 5.9" (150 mm) thick, rated 3,000 PSI or more and aged at least 7 days. Asphalt is not suitable.

Two mechanical safety locks are supplied and set in place once the lift is raised. To lower, press UP to raise the lift slightly, remove the safety locks, then push the DOWN lever.

Four ramp extensions, a lever, three caster wheels (one front, two rear), two safety locks, the power unit on its lock stand, a hydraulic oil pipe, four rubber lift pads, hardware and the installation manual.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare