Skip to content

Daytona LTPF12 12,000 lb 2-Post Floorplate Lift

Original price $4,047.00 - Original price $4,047.00
Original price
$4,047.00
$4,047.00 - $4,047.00
Current price $4,047.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Daytona LTPF12 puts a 12,000 lb rating into a floorplate two-post lift, so heavier trucks can be lifted in bays without room for an overhead bar. It stands 114.0" tall and runs on 240V single-phase power.

Shipping information

The delivery fee in your cart is an estimate. Freight is calculated by our warehouse after ordering; we'll confirm the delivery cost before charging your card.
A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
12,000 lbs
Power
240V, 3 HP, 13A, single phase, 60Hz
Overall height
114.0"
Overall width
155.5"
Warranty
Daytona 5-2-1 Limited

Why Choose the Daytona LTPF12

  • Rated capacity

    The lift has a 12,000 lb rated capacity for heavier pickups, vans and light commercial vehicles within the rating.

  • No overhead crossbar

    The floorplate design has a 114.0" overall height and no overhead crossbar.

  • Lifting cylinders

    The lift uses dual chain-drive hydraulic cylinders.

  • Baseplate

    The lift has a heavy-duty baseplate design.

  • Truck adapters

    Truck adapters are included for higher frame points.

  • Power requirements

    The lift runs on 240V single-phase power (3 HP, 13A).

Product Overview

12,000 Lbs Without the Overhead Bar

Most 12,000 lb two-post lifts use an overhead crossbar, which needs a tall ceiling. The LTPF12 uses a floorplate instead and keeps its overall height to 114.0". That suits truck work in bays with a lower roof line, and it leaves nothing overhead for a tall van to hit.

Drive and Base

Each side is driven by a chain-drive hydraulic cylinder, and the LTPF12 uses a heavy-duty baseplate design. The lift measures 155.5" across overall, so plan the bay width around that figure.

Adapters and Low Reach

Truck adapters are included for higher frame points, and a 4.33" minimum lifting height suits lower vehicles.

Where It Sits in the Range

Compare it with the LTPF9 for lighter work, or with the LTPA12 12,000 lb overhead lift if you have the ceiling height and want a clear floor between the posts.

Specifications

SpecificationValue
ModelLTPF12
Lift type2-post floorplate
Rated capacity12,000 lbs
Overall height114.0"
Overall width155.5"
Minimum lifting height4.33"
DriveDual chain-drive hydraulic cylinders
BaseHeavy-duty baseplate design
Truck adaptersIncluded
Power240V, 3 HP, 13A, single phase, 60Hz
ShippingLift 116" × 22" × 39", 2,200 lbs

What's Included

  • LTPF12 lift (two posts, floorplate, carriages and arms)
  • Hydraulic power unit (240V single phase)
  • Truck adapters

Not included: Installation and anchors.

Best For

  • Truck-focused shops with ceilings too low for an overhead 12,000 lb lift
  • Fleet garages servicing pickups and vans within 12,000 lbs
  • Owners of heavier personal trucks who need a floorplate format

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift is 114.0" tall. Add the height of the vehicle at working height and measure to the lowest obstruction.
Floor space
155.5" overall width, plus working room on both sides.
Concrete
Follow the slab and anchor requirements in the installation manual supplied with the lift, and have the slab verified before anchoring.
Location
Indoor installation only, as Daytona's warranty requires.
Electrical
240V, 3 HP, 13A, single phase, 60Hz. A licensed electrician should size the circuit and breaker.
Hydraulic
Hydraulic: dual chain-drive cylinders. Use the fluid specified in the manual supplied with the lift.

Warranty

Daytona 5-2-1 Limited Warranty: 5 years on structural components, 2 years on power units, cylinders and seal kits, and 1 year on other defective parts, minus exclusions. Coverage starts on the purchase-invoice date, applies to the original owner, and requires indoor installation and maintenance as set out in the owner's manual. Wear items such as cables, hoses, slider blocks, chains and rubber pads are excluded. Warranty claims are started through Garage Lift Depot.

Shipment

Crate
Lift crate 116" × 22" × 39", 2,200 lbs.
Unloading
A forklift is required on site to unload; lifts are too heavy for liftgate delivery.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

It keeps the lift at 114.0" tall with no overhead bar, so heavier trucks can be lifted where an overhead model will not fit.

4.33".

Follow the current Daytona LTPF12 installation manual. Daytona's sources do not agree on a slab figure for this model, so we do not publish one; have your slab assessed before anchoring.

155.5" overall.

No. It runs on 240V single phase at 13A.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare