Skip to content

Olympic 2PBP-8 8,000 lb 2-Post Baseplate Car Lift

Original price $3,773.00 - Original price $3,773.00
Original price
$3,773.00
$3,773.00 - $3,773.00
Current price $3,773.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Olympic 2PBP-8 is an 8,000 lb two-post baseplate lift. It lifts to 71", has 15 locking positions, stands 110.2" tall, and comes with the HPU2203 3 HP / 2.2 kW 220V single-phase power unit and four 3.5" truck adapters.

Shipping information

A forklift is required on site.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
8,000 lb
Power
HPU2203, 3 HP / 2.2 kW, 220V single-phase
Overall height
110.2"
Overall width
129.92"
Maximum lifting height
71"

Why Choose the Olympic 2PBP-8

  • Overall height

    Overall height is 110.2", useful in garages where a taller clear-floor lift will not fit. Allow extra clearance above for the vehicle and any obstructions.

  • Baseplate design

    The lift uses a baseplate design with approx. 100" of drive-through width.

  • Pad and lift height

    The lift has a 3.94" minimum pad height and a 71" maximum lift height.

  • Locking positions

    There are 15 locking positions along the columns.

  • Truck adapters included

    Four 3.5" truck adapters are included for higher-riding vehicles.

  • Load testing

    The lift is load-tested at 150% of its rated capacity.

Product Overview

A Baseplate Two-Post Lift for Lower Ceilings

The 2PBP-8 is a baseplate two-post lift. At 110.2" overall height, its columns suit garages with limited ceiling height. Measure the full lifting height of your tallest vehicle, plus any door tracks or lights, before ordering.

Arms and Adapters

Front arm reach is 31.5"–45.75" and rear arm reach is 31.5"–46". Swing-arm supports with pads and four 3.5" truck adapters come with the lift, and a 6" truck adapter set (4PTA-6) and frame cradle set (2PFC) are sold separately.

Footprint and Speed

The lift is 129.92" wide overall with 110.2" between columns and approx. 100" of drive-through width. Rise time is approx. 50 seconds.

Specifications

SpecificationValue
ModelOlympic 2PBP-8
Lift type2-post baseplate lift
Rated capacity8,000 lb
Maximum lifting height71"
Minimum pad height3.94"
Locking positions15
Front arm reach31.5"–45.75"
Rear arm reach31.5"–46"
Overall height110.2"
Overall width129.92"
Width between columns110.2"
Drive-through widthApprox. 100"
Rise timeApprox. 50 seconds
PowerHPU2203, 3 HP / 2.2 kW, 220V single-phase

What's Included

  • Olympic 2PBP-8 two-post baseplate lift
  • HPU2203 power unit
  • Four 3.5" truck adapters
  • Pin-on carriage
  • Swing-arm supports with pads
  • Door anti-crush rubber
  • Mounting hardware

Sold separately: 4PTA-6 6" truck adapter set, 2PFC frame cradle set, APU air/power utility station, anchoring epoxy.

Not included: Installation.

Best For

  • Home and hobby garages with limited ceiling height
  • Small shops servicing vehicles up to 8,000 lb
  • Buyers who want a baseplate two-post lift with truck adapters included

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Ceiling
The lift is 110.2" tall. Allow additional clearance above for the raised vehicle and any obstructions such as door tracks and lights.
Floor
Level concrete with no more than a 3° slope, no cracks or expansion seams. Not on asphalt.
Concrete
Install on concrete at least 6.3" thick, minimum 3,000 psi, fully cured (new concrete at least 28 days).
Location
Indoor installation only.
Electrical
HPU2203 power unit: 3 HP / 2.2 kW, 220V single-phase.
Electrical
Wire the lift on a dedicated circuit with a 25 A time-delay fuse or breaker (208–230V single-phase) and minimum 10-gauge wire.
Electrical
Never operate the motor below 208V.
Electrical
Wiring by a licensed electrician.

Warranty

Olympic warranty: 10 years on major structural components; 3 years on electric and pneumatic power units, hydraulic cylinders, cables, hoses, locks, pulleys, sheaves and bushings; 1 year on wear parts such as pads, slide blocks and rubber components. Coverage begins on the date of shipment, applies to the original purchaser, requires professional installation, and does not include labor.

Frequently Asked Questions

110.2" overall. Allow extra clearance above for the vehicle on the lift and any overhead obstructions.

71" maximum lift height, with 15 locking positions and a 3.94" minimum pad height.

A dedicated 208–230V single-phase circuit with a 25 A time-delay fuse or breaker and at least 10-gauge wire, wired by a licensed electrician. Do not run the motor below 208V.

At least 6.3" thick, minimum 3,000 psi, fully cured (at least 28 days for new concrete), level to within 3°, with no cracks or expansion seams.

No. The lift is for indoor installation only.

Related Equipment

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare