Skip to content

Daytona LFPA14 14,000 lb 4-Post Alignment Lift

Original price $11,590.00 - Original price $11,590.00
Original price
$11,590.00
$11,590.00 - $11,590.00
Current price $11,590.00
Talk to a Lift Specialist Text or call us directly — no call centers, no hold music
Fast Order Processing Processing and transit times vary by product and manufacturer.
Tracked Shipping Tracking information is provided when your order ships.
Warehouse Pickup May Be Available Contact us to confirm pickup availability for your product and location.

The Daytona LFPA14 is a 14,000 lb four-post lift built for wheel alignment. It has built-in rear slip plates and adjustable front turntables, 247.5" runways, and a ladder lock with positions every 3.5". It runs on 240V single-phase power.

Shipping information

The delivery fee in your cart is an estimate. Freight is calculated by our warehouse after ordering; we'll confirm the delivery cost before charging your card.
A forklift is required on site; lifts are too heavy for liftgate delivery.
Ships within 1-5 business days; freight transit is typically 5-10 business days.
Not currently available to Alaska, Hawaii, Iowa, Maine, or Rhode Island.

At a Glance

Rated capacity
14,000 lbs
Power
240V, 4 HP, 15A, single phase, 60Hz
Overall height
94.3"
Overall width
153.9"
Overall length
268.7" (not including ramps)
Warranty
Daytona 5-2-1 Limited

Why Choose the Daytona LFPA14

  • Rated capacity

    The lift is rated at 14,000 lb for cars, pickups, vans and light commercial vehicles within the rating.

  • Built-in alignment hardware

    Slip plates and adjustable turntables are built in, so the alignment hardware is part of the lift.

  • Long runways

    The 247.5" × 25.6" runways suit longer wheelbases.

  • Ladder lock system

    The ladder lock system has locking positions every 3.5".

  • Cables and approach ramps

    The lift uses aircraft-quality lifting cables and tilting approach ramps.

  • Power and matching jack

    It runs on 240V single-phase power (4 HP, 15A), and a matching Daytona RAJ8 rolling jack is available (sold separately).

Product Overview

An Alignment Rack Sized for a General Repair Bay

Alignment work follows tire sales, suspension repairs and steering complaints. The LFPA14 is rated at 14,000 lbs, which covers most cars, pickups, vans and light commercial vehicles. Check vehicle weight against the rating before lifting.

Alignment Hardware Built In

The slip plates are built into the rear of the runways, and the front turntables adjust for wheelbase. Both are part of the lift as supplied. An alignment machine is not included.

Runways, Locks and Lifting

The runways are 247.5" long and 25.6" wide, with 43.7" between them. A ladder lock system holds the lift at positions every 3.5", and the runways ride on aircraft-quality lifting cables. Clearance under the runway at full height is 69.3".

Footprint

Overall, the lift is 268.7" long (not including ramps), 153.9" wide and 94.3" tall. The approach ramps tilt up when not in use.

Wheels-Free Work

Daytona's RAJ8 rolling jack is made to fit the LFPA12 and LFPA14. It is air-powered and rated at 8,000 lbs, with 2-3/4" pad extensions, and lets wheels come off without leaving the rack.

Specifications

SpecificationValue
ModelLFPA14
Lift type4-post alignment lift
Rated capacity14,000 lbs
Overall length268.7" (not including ramps)
Overall width153.9"
Overall height94.3"
Runway size247.5" × 25.6"
Inner width between runways43.7"
Clearance under runway (full height)69.3"
Lock systemLadder lock, positions every 3.5"
CablesAircraft-quality lifting cables
Alignment hardwareBuilt-in slip plates, adjustable turntables
Approach rampsTilting
Power240V, 4 HP, 15A, single phase, 60Hz
Shipping247" × 32" × 42", 5,400 lbs

What's Included

  • LFPA14 lift (four posts, runways and cables)
  • Built-in rear slip plates
  • Adjustable front turntables
  • Tilting approach ramps
  • Hydraulic power unit (240V single phase)

Not included: Wheel alignment machine, RAJ8 rolling jack, and installation.

Best For

  • Independent repair and tire shops adding in-house alignment
  • Dealership service departments
  • Fleet garages aligning pickups, vans and light commercial vehicles within 14,000 lbs

Installation & Site Requirements

Confirm these before ordering. Concrete, ceiling and power affect whether this lift can be installed.

Floor space
268.7" × 153.9" before the ramps. Add ramp length and room to walk around the lift and position the aligner.
Ceiling
The lift is 94.3" tall. Your ceiling must also clear the tallest vehicle at working height.
Concrete
No minimum slab figure is given for this model. Follow the installation manual supplied with the lift and have the slab checked before anchoring.
Location
Indoor installation only, as Daytona's warranty requires.
Electrical
240V, 4 HP, 15A, single phase, 60Hz. A licensed electrician should confirm the circuit and breaker.
Hydraulic
Hydraulic cylinder with aircraft-quality cables. Use the fluid specified in the manual supplied with the lift.
Air
The RAJ8 rolling jack (optional) is air-powered, so plan a shop air drop if you add it.

Warranty

Daytona 5-2-1 Limited Warranty: 5 years on structural components, 2 years on power units, cylinders and seal kits, and 1 year on other defective parts, minus exclusions. Coverage starts on the purchase-invoice date, applies to the original owner, and requires indoor installation and maintenance as set out in the owner's manual. Wear items such as cables, hoses, slider blocks, chains and rubber pads are excluded. Warranty claims are started through Garage Lift Depot.

Shipment

Crate
One freight crate, 247" × 32" × 42", 5,400 lbs.
Unloading
A forklift is required on site; lifts are too heavy for liftgate delivery.

Freight pricing, delivery options and timing are listed under Shipping information.

Frequently Asked Questions

Yes. Both are part of the lift. The alignment machine is sold separately.

The lift is 268.7" × 153.9" without the ramps. Plan extra length for the ramps and space around the lift for the technician and the aligner.

No minimum slab figure is given for the LFPA14. Follow the installation manual supplied with the lift and have your slab assessed before anchoring.

No. It runs on 240V single phase at 15A.

The Daytona RAJ8, which is made for the LFPA12 and LFPA14.

The LFPA14 adds 2,000 lbs of capacity and longer runways. The LFPA12 takes up less floor space.

Related Equipment

Manuals

LFPA14 Manual (November 2025) — contact us for a copy.

Authorized Dealer

Genuine Krebs, Olympic, Daytona and Katool equipment, sold with the manufacturer's warranty.

30-Day Return Window

Eligible unused products can be returned within 30 days of delivery.

Secure Checkout, Every Order

Payments processed and encrypted through Shopify's secure system.

Real Installation Guidance

We'll review the manufacturer's ceiling, concrete and power requirements with you before you order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare